When watering plants, it all comes down to the right amount. The hillvert watering computer controls the amount of water for two water lines according to your wishes and those of the plants you want to care for regularly. A humidity sensor reliably determines the moisture in the soil. Whether for your drip hose system or your lawn sprinkler, the ideal amount of water is quickly set and reliably delivered to the green. And you can take care of other things in the meantime!

The water manifold connects directly to the tap for your garden via a G3/4'' or G1' thread and requires only 2 AA batteries (3 V) (not included) to be operated on site. With the help of the LCD display, the watering duration and watering frequency for two independent water lines can be set easily and conveniently.

The watering time can be set very precisely for each water outlet in 5 second increments and from 1 min to 360 min.  This allows you to determine extremely accurately the amount of water with which your plants are to be supplied. The solenoid valve works with a working pressure of 0,5-8 bar and is thus designed for all common watering systems. In addition, you can set the watering intervals according to which the water should flow. The flexible sprinkler computer offers intervals of just 10 or 30 s, but also in minutes, hours or even daily intervals.

The irrigation computer can be connected to a humidity sensor, which is included in this set. With the help of the sensor, you can determine the water requirement even more precisely and skip watering times if necessary. In this way, the water requirement is optimally adapted to the environmental conditions and you prevent unnecessarily large amounts of your valuable water from seeping away unused in the garden soil. In addition, you can purchase a rain sensor (10090181) from hillvert at expondo, which provides valuable information for the required water quantities.

The desired moisture level of the soil can be set on the soil humidity sensor in three different levels, selectable between 25 %, 45 % or 60 %. If the moisture level of the earth is above the set level, the humidity sensor sends a signal to the watering controller. The signal ensures that the next watering process is skipped so that the soil does not get too wet. The measuring process of the humidity sensor repeats periodically every 60 s. The humidity sensor earth can be operated quickly and easily by means of the integrated LED display: The desired moisture level can be selected by pressing the corresponding button and is accompanied by an illuminated LED light as a signal.

The watering computer is equipped with two outlets that you can control independently. This allows you to precisely adjust the water requirements of different plants with just one device. Thus, you only need one water connection to optimally water different areas in your garden.