Cordless Pipe Sander - 760 mm - incl. 2 batteries

The pipe sander has a 400-watt engine and a rotation speed of up to 3,000 rpm. It is ideally suited for performing high-quality, professional metalworking efficiently. For working on sensitive materials, the speed can be reduced to about 1,200 revolutions. This enables belt speeds between 3.7 and 9.2 metres per second. In this speed range both polishing and grinding work can be carried out with rapid progress.

The seamless speed regulation ensures high-quality results. It is divided into six zones and allows an exact pre-setting of the required parameters. You can work on curved metal workpieces and even on stainless steel surfaces. The cordless pipe sander works especially well on difficult-to-reach pipes and tubes thanks to its compact design.

The cordless pipe sander is powered by an 18-volt lithium ion battery. Its capacity of 4 ampere hours is suited for professionally use. Cordless operation and the compact design allow for plenty of freedom of movement and allow operation in confined spaces. Thanks to the supplied quick charger, the cordless pipe sander can be used again after a short time.

Another plus is the extra handle and the low net weight of just 3.15 kilograms. For high-quality results, a constant speed is essential, especially on sensitive surfaces. The cordless pipe sander has control electronics that keep a constant pre-set speed during operation. The two-stage gearbox has been designed for continuous operation and guarantees high efficiency.

The large sanding angle of 270 degrees offers enormous advantages in terms of working speed, especially when sanding and polishing small workpieces and thin tubes. The pipe sander does not balk at pipes with large diameters. It can handle pipes with a diameter of up to 180 millimetres. It is possible to work with sanding belts that are up to 40 millimetres wide and 760 millimetres long. The belts are easy and safe to replace.

The demands on professional tools in the metalworking industry are manifold. The work status, the quality, and thus the efficiency all play a major role. Protecting users from accidents is just as important. To increase safety and to prevent contact with the sanding belt, the top of the device is equipped with a special protective cover.

The housing of the battery MSW-4AKK is highly durable and effectively protects against shocks and vibrations. With its light weight and compact design, this battery supplements your cordless power tools without weighing them down. You can easily attach it to the device via a click mechanism. For optimum safety, the battery is protected against charging errors such as overcharging, undercharging, overvoltage, undervoltage and short circuits.

These high-quality lithium-ion batteries have a considerably higher performance than traditional nickel cadmium batteries. They can be charged at any time, regardless of whether the current charge is at 10 or 50%, as they charge without memory effect. The batteries only need 120 minutes for a complete charge. The charging level is displayed via the LED charge level indicator, which is visible at the touch of a button.