Heat Gun - 3 Stages - 80- 600 °C

Item number: EX10060221 / Model: HP 2000 Pro

Heat Gun - 3 Stages - 80- 600 °C

  • Item number: EX10060221
  • Model: HP 2000 Pro
  • In the product range since: 2017

Prices incl. VAT Shipping costs abroad not included*

Ready for immediate shipping When ordering and making payment within the next 0 hours 17 mins, shipping will happen today.

Ready to ship today, Delivery time appr. 4-6 workdays**


  • For craft workshops, renovation works, plastics processing, model making, packaging, etc.
  • For removing paint and lacquer
  • For welding plastic materials
  • For shrinking PVC and other plastic materials
  • For packaging with shrinking film
  • Temperature, 80-600°C
  • Hot airflow, 350 l/min or 500l/min
  • Flexible usage because of the 4 nozzles
  • Precise operation with 1 spatula and 3 scrapers

Key facts

Many tasks are just easier dealt with a blast of hot air. With the hot air gun HP 2000 Pro by MSW you can easily remove paint or lacquer from window or door frames, solder plastic pipes or bend plastic materials. The powerful hot air gun can also be used for packaging with shrinking foil, sealing of wires with heat-shrinking tubes, defrosting frozen pipes or pre-heating steel for welding.

The hot air gun is powered by up to 2000 watts and has three different airflow stages, adapting itself to different kinds of work. The first stage has a temperature of 80°C and an airflow of 350l/min. The low temperature allows you to accelerate small tasks like drying glue or construction joints.

The second stage has a temperature range between 80 and 600°C, that can be seamlessly adjusted, and an airflow of 350l/min. This stage is used for shrinking PVC or bending plastic materials. The third stage has the same temperature range between 80 and 600°C, but the airflow of 500l/min enables work like renovating window frames or solder plastic pipes.

The hot air gun has an extensive range of accessories which allow for a versatile usage of the device. Two glass protection nozzles prevent an over-heating of glass panes while removing paint or lacquer from window frames. Larger paint surfaces can be evenly removed with the fishtail nozzle. The reduction nozzle enables you to precisely weld plastic materials, de-solder electrical components from circuit boards or heat up metal.

For removing the heated materials, there is a set of spatulas and three scrapers that can easily deal with a variety of surfaces. The blades of the scrapers can be easily exchanged. Their flat, oval and convex shapes enable you to remove paint, lacquer or foil from hard-to-reach spots.

The handle of the hot air gun has a special ergonomic design that ensures a comfortable grip. The power cable has a length of 2 meters and allows you to move around while operating the device. The hot air gun is delivered with a case which also holds the extensive accessories and can be used for transportation.

HP 2000 Pro
Temperature range stage 1
80 °C
Temperature range stage 2
Temperature range stage 3
Air flow stage 1
350 l/min
Air flow stage 2
350 l/min
Air flow stage 3
500 l/min
Number, nozzles
Number, scrapers
Length, power cable l
Protection class
Measurements (LxWxH)
27.2 x 7.08 x 18.4 cm
0.72 kg
Transportation measurements (LxWxH)
30 x 9.5 x 28.5 cm
Transportation weight
1.8 kg
  • Hot air gun HP 2000 Pro
  • Fishtail nozzle
  • Glass protection nozzle, oval
  • Glass protection nozzle, straight
  • Reduction nozzle
  • Spatula
  • Scraper handle
  • Scraper, oval
  • Scraper, convex
  • Scraper, flat
  • Case
  • Instruction manual

Write the first review for this product

Leave a review
Evaluations will be activated after verification.

The fields marked with * are required.