The high-powered MSW-ST1800WP mixing drill with 1.800 watts and a two-speed gearshift is robust and reliable for mixing concrete, cement or paint. It can be used in a professional application on a construction site or workshop as well as in the do-it-yourself sector for renovations or finishing work. The power tools and craft supplies from MSW are used in workshops, on construction sites, in the house and garden.

The rotation speed of the electric engine can be electronically and very precisely adjusted between 180 and 700 rpm. There are two speeds pre-set in the device. The variation between them is seamless. In first gear between 180 to 400 rpm, in second gear between 300 and 700 rpm.

Decisive for the speed is the material to be processed. A test run is recommended to optimally match the speed to the properties of the material. It is easy to fine-tune the handle using the knob, which can be adjusted to the positions one through five.

With a diameter of 135 mm, the whisk attached to the stir bar makes for a fast and efficient working. Due to the M14 thread, the flexible mixing drill allows you to use all the usual stirring tools in its robust holder.

The locking function of the on / off switch is particularly useful in intensive use as a paint stirrer or mortar stirrer. The mixing drill can be set to continuous operation, which greatly facilitates the handling of larger amounts of material. A quick push of the on / off switch stops the continuous operation.

The soft-start function not only optimizes the work at a crucial point, but also protects the environment. With this function, the rotation speed can be increased slowly. Unnecessary and unpleasant splashes are prevented.

The intuitive mixer has a generous, ergonomic handle. The operation is fatigue-proof and safe even when used for a long time. A high degree of freedom of movement is ensured by the hard-wearing 195 cm power cable. After completion of the work, the whisk can be easily removed and cleaned.