Preview: Factory seconds Stick Welder - 200 A - 230 V

Preview: Gesamtansicht mit Kabel von Elektroden Schweißgerät - 200 A - 230 V

Factory seconds Stick Welder - 200 A - 230 V

Zoom

Gesamtansicht mit Kabel von Elektroden Schweißgerät - 200 A - 230 V

Factory seconds Stick Welder - 200 A - 230 V

★ ★ ★ ★ ★ (0)

Item number: EX20020018
Model: S-MMA-200-PI
In the product range since: 2018

Instead of: £193.20 You save £38.64 £154.56

Prices incl. VAT Shipping costs abroad not included*

Ready to ship today, Delivery time appr. 4-6 workdays**

Factory seconds Stick Welder - 200 A - 230 V

MMA (manual electrode welding)
Anti-Stick (prevents overheating of the electrode as it ends the power supply immediately)
Hot-Start (increases output voltage at the start automatically)
power fans for cooling and to prevent overheating
robust powder coated sheet steel housing
overheating protection

Discount: 15%

The MMA welding device SMMA-200PI by Stamos Germany is characterized by its robust construction, high degree of reliability and works with an input voltage of 230 V. Due to the use of lighter but stable materials it weighs only 6 kg and its dimensions are 39 x 25 x 12 cm. The welding current of the welding device SMMA-200PI can be regulated within the range of 20 - 200 Ampere, so this tool is able to adjust to the various conditions. Buy the low-price welding device SMMA-200 PI by Stamos Germany today!

The MMA welding device SMMA-200PI uses bipolar transistor technology with a 80% duty cycle.

The Insulated Gate Bi-polar Transistor (IGBT) is a semiconductor device, which is increasingly used in the field of the power electronics. IGBT combines the benefits of the bipolar transistor (e.g. good crossover response, high reverse voltage, robustness for welding devices) with the advantages of the field effect transistor (almost powerless control). Additionally, the advantage of using this technology in our MMA welding device SMMA-200PI lies in the high prevention of short circuits as the IGBT limits the load current.

IGBT’s are an advancement of the vertical power MOSFET’s.

Model

SMMA-200PI

Condition

Factory second

Input voltage

230V, 1-Phase

AC Frequency

50/60 Hz

Duty cycle

80%

Ampere at 100% duty cycle

160

Welding strength

0,5 - 4.0 mm

Open circuit voltage

62 V

Adjustable welding current

20 - 200 A

For electrode

1.6 - 4.0 mm

Weight

6,3 kg

Protection class

IP21

Insulation class

Dimension (LxWxH)

39 x 25 x 12 cm

Weight

6 kg

Delivery dimension (LxWxH)

51 x 22 x 33 cm

Delivery weight

9.6 kg

IGBT

IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.

VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

GROUND TERMINAL CONNECTOR

MMA WELDING CABLE CONNECTOR

SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

WELDING CURRENT

HOT START

Through automatically boosting the tension at the ignition of the arc, this function facilitates the electrical arc ignition. After ignition, the unit automatically returns to the pre-set voltage.

ARC FORCE

The current value increases automatically when the arc is shorter.

ANTI-STICK

This function helps to prevent overheating of the electrode by switching off the welding current when the electrode sticks to the material.

MMA WELDING

Electrode welding with a coated electrode.

POWER SWITCH

OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.