Plasma Cutter - 40 A - 230 V - Inbuilt Pneumatic Air Compressor
£399.00 Prices incl. VAT £429.00

Plasma Cutter - 40 A - 230 V - Inbuilt Pneumatic Air Compressor

Manufacturer: Stamos Germany | Item number: EX10020210 | Model: S-PLASMA 40

Plasma Cutter - 40 A - 230 V - Inbuilt Pneumatic Air Compressor
Plasma Cutter - 40 A - 230 V - Inbuilt Pneumatic Air Compressor
Plasma Cutter - 40 A - 230 V - Inbuilt Pneumatic Air Compressor
Plasma Cutter - 40 A - 230 V - Inbuilt Pneumatic Air Compressor
Plasma Cutter - 40 A - 230 V - Inbuilt Pneumatic Air Compressor
360° photo
Tap to open gallery
Instead of: £429.00   You save £30.00   £399.00 Instead of: £429.00  

Prices incl. VAT

  • Free shipment to UK

    ?

    Ready to ship today, Delivery time appr. 6-10 working days

  • 30 days return service

    ?
  • 3 years guarantee

Product highlights

  • integrated air compressor
  • Cutting current 20-40 A
  • Cutting thickness: 10 mm
  • Overload protection
  • V MOSFET technology

  • A high-performance plasma cutter for workshops, garages and metal fabrication facilities
  • Cuts conductive materials such as steel, stainless steel, cast iron, copper, nickel or aluminium
  • Integrated air compressor: no external compressed air supply necessary
  • Precise and distortion-free cuts up to 10 mm thickness
  • Overload protection ensures a high degree of safety and immediately turns off the device if necessary.
  • Modern V MOSFET technology ensures high duty cycle
  • Cutting current between 20 and 40 A infinitely variable
  • Low operating costs through the use of air
  • Safe and easy handling
  • Compact and easily transportable

The compact plasma cutter with integrated compressor

The plasma cutter S PLASMA 40 from Stamos Germany cuts electrical conductive materials such as steel, stainless steel, cast iron, copper, nickel or aluminium precisely and without deformation and captivates the market through the use of the integrated air compressor. This reliable and experienced technology ensures always a high level of safety within the working environment. This professional device cuts up to 10 mm cutting capacity up to 40 amps and is ideally suited for repair or renovation work in workshops or garages.

The compact and lightweight design allows for an easy and mobile use.

The cutting or separating of the metals takes place by means of a plasma jet (compressed air) rather than by the use of expensive gases such as argon or nitrogen. The infinitely variable adjustability allows precise control of the cutting current. Due to the high temperature and cutting speed, distortion of the material is minimized and a clean straight cut edges is ensured, therefore no post-processing is needed.

A special feature of the S-PLASMA 40 plasma machine is the integrated compressed air compressor. The advantage compared with traditional systems is that no external source of compressed air is needed and thus no additional devices need to be purchased. This professional device is ideal for mobile use and is easy to transport due to the carrying handle

The device is equipped with the modern V-MOSFET inverter technology, which ensures that the current is used optimally and that damage caused by overvoltage is prevented. The knob is used for continuous adjustment of the cutting current in the range of 20 to 40 amps. With the switch, the after-flow time is selected between 2.5 and 5 seconds.

In addition to the plasma cutter S PLASMA 40, you also receive useful and extensive accessories: a hose packet with torch (type :) PT-31 length: 4 m), a ground cable with clamp (length:) 3 m), 3 ceramic nozzles, 3 ceramic rings, 3 electrodes, 3 cutting nozzles, a tool kit and an instruction manual are supplied.

Model
S PLASMA 40
Condition
New
Nominal input voltage
230 V, 1-phase
Input frequency
50 Hz
Cutting current
20-40 A
Operating time / duty cycle
60%
Ignition
Contact
Cutting performance
10 mm
Cutting width
1 mm
Length hose package
4 m
Length of ground cable
3 m
Power cable length (with EU plug)
1,9 m
Equipment cooling
Fan
Burner cooling
Air
Protection class
IP21
Compressor type
oil free
Compressor performance
750 W
Air delay
2.5 or 5 seconds
Dimensions (LxWxH)
42.50 x 20.50 x 54.50 cm
Weight
21.60 kg
Shipping dimensions (LxWxH)
55.00 x 30.00 x 59.00 cm
Shipping weight
28.50 kg
Technical drawing
Delivery Package
  • Plasma cutter S PLASMA 40
  • Tool bag
  • Ground cable with clamp (3 m)
  • Hose package with cutting torch (4 m)
  • Power cable (1.9 m)
  • 3 x ceramic nozzles
  • 3 x ceramic rings
  • 3 x electrode
  • 3 x cutting nozzles
  • User manual
 
MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Show moreShow less
 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
CUTTING TORCH CONNECTION

 

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
GAS POST-FLOW TIME

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH

 

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

5 Based on 3 reviews

Sort by...

Leave a review (5 stars is highest, 1 is lowest)
Click on the link sent to your e-mail address and confirm your opinion! It will be published after verification.

The fields marked with * are required.

Reviews from Kees (19 Sep 2021)
Reviews from Kees (19 Sep 2021) Fijne plasmasnijder

Reviews from Amazon Customer (30 Nov 2019)
Reviews from Amazon Customer (30 Nov 2019) Bien

Bon produit, bon rapport qualités prix

Reviews from Amazon Customer (21 Jul 2019)
Reviews from Amazon Customer (21 Jul 2019) Découpeur Stamos

Satisfait du poste de découpe pour mon utilisation en métallerie ! par contre le capot a subit un enfoncement a la préparation de l expédition et non au transport car l'emballage était intact.

expondo expert

Still not sure?

Our experts are ready to help!
01633 603530
Mon - Fri 09:30am - 04:30pm
Plasma Spare Parts Set - CUT 40 50 - small
£42.99
Prices incl. VAT Shipping costs abroad not included
Plasma Spare Parts Set - CUT 40 50 - medium
£79.00
Prices incl. VAT Shipping costs abroad not included
Schweißhelm – Blaster – ADVANCED SERIES - 2982 - 1
£69.00
Prices incl. VAT Shipping costs abroad not included
This product
  • integrated air compressor
  • Cutting current 20-40 A
  • Cutting thickness: 10 mm
  • Overload protection
  • V MOSFET technology

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter - 40 A - 230 V - Inbuilt Pneumatic Air Compressor

Plasma Cutter - 40 A - 230 V - Inbuilt Pneumatic Air Compressor

(3)
Instead of: £429.00   £399.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • integrated air compressor
  • Cutting current 20-40 A
  • Cutting thickness: 10 mm
  • Overload protection
  • V MOSFET technology
  • Cutting current: 50 A
  • Cutting depth: 12 mm
  • Cutting width: 1 mm
  • LCD display
  • Duty cycle: 60 %

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter - 50 A - 230 V

Plasma Cutter - 50 A - 230 V

(7)
£229.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Cutting current: 50 A
  • Cutting depth: 12 mm
  • Cutting width: 1 mm
  • LCD display
  • Duty cycle: 60 %
  • Cutting current: 20 - 70 A
  • Cutting capacity up to 20 mm
  • Pilot arc
  • LED display
  • 400 V

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter - 70 A - 400 V - pilot arc

Plasma Cutter - 70 A - 400 V - pilot arc

(1)
£369.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Cutting current: 20 - 70 A
  • Cutting capacity up to 20 mm
  • Pilot arc
  • LED display
  • 400 V
  • Plasma
  • Power
  • 230 V
  • Cutting current: 10 - 50 A
  • Cutting thickness: 12 mm

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter - 50 A - 230 V

Plasma Cutter - 50 A - 230 V

(3)
£319.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Plasma
  • Power
  • 230 V
  • Cutting current: 10 - 50 A
  • Cutting thickness: 12 mm