Plasma Cutter - 45 A - 230 V - HF ignition
£289.00 Prices incl. VAT

Plasma Cutter - 45 A - 230 V - HF ignition

Manufacturer: Stamos Germany | Item number: EX10021222 | Model: S-PLASMA 50-IGBT

Plasma Cutter - 45 A - 230 V - HF ignition
Plasma Cutter - 45 A - 230 V - HF ignition
Plasma Cutter - 45 A - 230 V - HF ignition
Plasma Cutter - 45 A - 230 V - HF ignition
Plasma Cutter - 45 A - 230 V - HF ignition
360° photo
Tap to open gallery
£289.00

Prices incl. VAT

  • Free shipment to UK

    ?

    Ready to ship today, Delivery time appr. 6-10 working days

  • 30 days return service

    ?
  • 3 years guarantee

  • Cutting current: 20 - 45 A.
  • Cutting depth up to 15 mm
  • HF ignition / IGBT
  • 2 T / 4 T switch
  • 230 V

  • Efficient – modern IGBT inverter and HF ignition
  • Powerful – maximum cutting current of 45 A, 100 % duty cycle at 20 A
  • Clear – control panel with LED display and control dial can even be used with welding gloves
  • Precise – distortion-free separating cuts up to 15 mm material thickness even in meshes thanks to pilot ignition
  • Flexible – switch easily between 2-stroke and 4-stroke operation

Powerful plasma cutter with HF ignition and 45 A.

The plasma cutter S-PLASMA 50-IGBT from Stamos Germany with modern IGBT inverter technology cuts electroconductive materials such as steel, stainless steel, cast iron, copper, nickel and aluminium precisely and without distortion. The professional device enables you to make cuts up to max. 15 mm deep at a cutting output up to 45 A and is perfect for repair and renovation work in workshops or garages.

Plasma cutter with high operating comfort

The cutting current can be adjusted between 20 and 45 A, and all values are clearly shown on the LED display. With a duty cycle of 100%, 20 A are possible. These performance values are sufficient to cut workpieces up to 15 mm thick. The plasma cutter can cut tool steels as well as stainless steel and other high-alloy steels. Even aluminium, copper and titanium can't resist the powerful plasma arc of the S-PLASMA 50-IGBT.

The plasma cutting machine offers two different working modes so that maximum progress can be achieved with every task. In 2-stroke mode, the torch will run for as long as the power switch is pressed. In 4-stroke mode, a single tap is sufficient to activate the burner and another tap to switch it off.

The plasma cutter from Stamos Germany works with 230 V operating voltage. This makes it the ideal tool for automotive workshops, commercial metalworking companies and industrial production. In addition, it also supports DIY enthusiasts in their demanding renovation and repair projects.

The burner is ignited by high frequency so that grids and grates can also be separated. To prevent oxidation or deformation of the workpiece after a cut, the air supply continues for 10 s afterwards. The air is also cooled by the post-flow of the burner to avoid the risk of damage. The base unit is also equipped with a powerful fan cooling system to prevent overheating.

The compact steel casing protects the technical equipment inside the plasma cutting machine. From the outside, it is protected from environmental influences with a coating. The plasma cutter is easy to transport thanks to the practical handle. With the QR code on the casing, you can call up the operating instructions for the plasma cutter at any time.

Voltage [V]
230
Ignition Plasma
HF
Efficiency [%]
83
Cooling
Fan
Plasma cable [m]
4.6
Duty cycle for 40°C [%]
30
Max cut current [A]
45
Min cut current [A]
20
Air pressure [bar]
3.5 - 5.5
Power cord [m]
2.5
Input power [kVA]
4.5
Ground cable [m]
3
Power factor
0.62
Cutting width [mm]
1.5
Burner cooling
Gas
Gas after-flow [s]
10
Max. input power [kVA]
10
Insulation class
H
Norm Compliance
EN60974-1
Max. input current [A]
35
IP Protection class
IP21S
Rated Input current [A]
20
Max cutting thickness [mm]
15
No-load voltage [V]
300
Welding current at 60% duty cycle [A]
30
Welding current at 100% duty cycle [A]
20
CNC
No
Water cooling
No
Dimensions (LxWxH) [cm]
49.5 x 16.5 x 33
Weight [kg]
10
Shipping dimensions (LxWxH) [cm]
65 x 27 x 39
Shipping weight [kg]
11.4
Delivery Package
  • Plasma Cutter S-PLASMA 50-IGBT
  • Plasma torch with hose package (4.5 m)
  • Earth cable (3 m)
  • Power cable (2.5 m)
  • Pressure reducer
  • Instruction manual
 
IGBT

IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.

Show moreShow less
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Show moreShow less
 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
CUTTING TORCH CONNECTION

 

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
NON-CONTACT HF-IGNITION

A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

Show moreShow less
 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH

 

 
"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

 
DISPLAY

Shows the welding / cutting parameters.

 
PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

Where can I find a suitable welding hood?

At expondo you will find a large selection of welding helmets in the welding clothing category. Or just look for a welding helmet in the online shop.

How can I be sure that my accessories will fit my plasma cutter?

expondo only offers accessories that are optimally matched to our devices. We are happy to be of service.

How can I stay up-to-date on new products or offers?

Sign up for our newsletter and keep yourself up-to-date!

Write the first review for this product



Leave a review (5 stars is highest, 1 is lowest)
Click on the link sent to your e-mail address and confirm your opinion! It will be published after verification.

The fields marked with * are required.

expondo expert

Still not sure?

Our experts are ready to help!
01633 603530
Mon - Fri 09:30am - 04:30pm
This product
  • Cutting current: 20 - 45 A.
  • Cutting depth up to 15 mm
  • HF ignition / IGBT
  • 2 T / 4 T switch
  • 230 V

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter - 45 A - 230 V - HF ignition

Plasma Cutter - 45 A - 230 V - HF ignition

£289.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Cutting current: 20 - 45 A.
  • Cutting depth up to 15 mm
  • HF ignition / IGBT
  • 2 T / 4 T switch
  • 230 V
  • Cutting current: 10 – 50 A
  • Cutting capacity up to 12 mm
  • Cutting width: 1 mm
  • Cutting parameters display
  • Incl. protective clothing

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter Set - 50 A - welding helmet - protective clothing

Plasma Cutter Set - 50 A - welding helmet - protective clothing

£479.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Cutting current: 10 – 50 A
  • Cutting capacity up to 12 mm
  • Cutting width: 1 mm
  • Cutting parameters display
  • Incl. protective clothing