TIG Welder - 180 A - Pulse - 60 % Duty Cycle
£259.00 Prices incl. VAT

TIG Welder - 180 A - Pulse - 60 % Duty Cycle

Manufacturer: Stamos Germany | Item number: EX10021047 | Model: S-WIGMA 180B

TIG Welder - 180 A - Pulse - 60 % Duty Cycle
TIG Welder - 180 A - Pulse - 60 % Duty Cycle
TIG Welder - 180 A - Pulse - 60 % Duty Cycle
TIG Welder - 180 A - Pulse - 60 % Duty Cycle
TIG Welder - 180 A - Pulse - 60 % Duty Cycle
TIG Welder - 180 A - Pulse - 60 % Duty Cycle
360° photo
Tap to open gallery

Prices incl. VAT

  • Free shipment to UK


    Ready to ship today, Delivery time appr. 6-10 working days

  • 30 days return service

  • 3 years guarantee

Product highlights

  • TIG DC / MMA
  • 180 A - 230 V
  • Duty cycle 60 %
  • Pulse frequency
  • Gas post-flow time: 1 - 5 sec

With a welding current from 10 to 180 A, the S-WIGMA 180B can be used for either TIG or MMA welding, depending on the type of metal and your welding conditions. In the process, the device attains a duty cycle of 60 %. The TIG welding machine uses direct current (DC) and can be used for welding more robust metals such as steel, stainless steel, copper or brass.

Show more Show less

The control panel is clearly arranged and is easy to use while wearing welding gloves. Three toggle switches allow you to directly choose the basic welding functions (TIG, MMA, Pulse, On, Off). You can then set the required values for the current and gas post-flow time using two dials.

Show more Show less

For TIG welding, simply select the pulse frequency on the control panel. You can choose between a low frequency of 2 Hz or a high frequency of 250 Hz. Selecting the pulse frequency also makes it possible to weld thinner sheets. In addition, a pulse frequency of over 200 Hz stabilises the arc even under difficult conditions.

Show more Show less

No additional gas is required for MMA (Manual Metal Arc) welding, enabling you to use it outdoors even in strong wind. With this welding method, the welder generates a very stable current, all the while securely maintaining the voltage. This allows you to make high-quality welds on a wide variety of metals.

Show more Show less

The MMA welding clamp can grasp even large electrodes with a diameter of up to 5 mm. With the MMA welding method, you can weld materials such as steel, iron, cast iron, nickel or copper from 1.5 to 10 mm thick. The welding machine enables you to correctly install and maintain railings, stairs, gates, doors, containers or metal machinery.

Show more Show less

The device is equipped with an overheat protection. The warning light lights up if the duty cycle is exceeded and the device is becoming overheated, or in the event of a sudden malfunction. The air cooling also provides additional safety during operation.

Show more Show less

  • Duty cycle of 60% at 180 A
  • Easy to operate all welding parameters
  • Pulse frequency for precise welding results on light metals
  • Versatile, for MMA and TIG welding
  • Powerful MOSFET technology with HF ignition

TIG Welder - 180 A - Pulse - 60 % Duty Cycle

The S-WIGMA 180B is perfect for professionals and beginners alike for use in workshops, home workshops or on the construction site. It stands out for its reliable performance values, simple operation and precisely adjustable welding results. It is also versatile, allowing you to use it as either a TIG or an arc welder, and can be used for a wide range of welding work. The robust TIG DC welder proves its resilience in daily use thanks to its sturdy housing.

Item number
Material, housing
Rated input voltage
230 V, 1 phase
50 Hz
Rated input current
17.8 A (TIG)
28.3 A (MMA)
Max. input current
31.4 A (TIG)
29.8 A (MMA)
Rated input power
7.2 kVA (TIG)
6.8 kVA (MMA)
Open circuit voltage
63 V
Ignition (TIG)
HF - high-frequency
Welding current TIG-DC / MMA
10 - 180 A
Operating time / duty cycle
60 %
Welding current at 100 % duty cycle
139 A
Welding current at 60 % duty cycle
180 A
Power factor
Pulse current
10 - 180 A
Pulse frequency
2 Hz / 250 Hz
Gas post-flow time
1 - 5 s
Gas solenoid valve
Diameter, electrode (TIG)
1 - 2.4 mm
Diameter, electrode (MMA)
1.5 - 5 mm
Welding strength TIG
1 - 4 mm
Welding strength MMA
1.5 - 10 mm
Pulse switch
Length of electrode holder with cable
1.9 m
Length, ground cable
1.3 m
Length, TIG hose package
3.7 m
Power cable
1.5 m
Insulation class
Protection class
Device cooling
Dimensions (LxWxH)
41.50 x 15.50 x 31.00 cm
11.20 kg
Shipping dimensions (LxWxH)
46.00 x 32.40 x 34.70 cm
Shipping weight
14.30 kg
Delivery Package
  • Welding machine S-WIGMA 180B
  • TIG welder with hose package, 3.75 m
  • Electrode holders with cable, 1.9 m
  • Ground cable with clamp, 1.3 m
  • Long torch cover
  • Short torch cover
  • Tungsten electrode (Ø 2 mm)
  • 3 ceramic gas nozzles (5/6/7 mm)
  • 3 clamping sleeves (2.0 / 2.4 / 3.2 mm)
  • Clamping sleeve housing
  • Instruction manual

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less

Powerful fans ensure an optimal removal of heat from the unit.


TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.

Show moreShow less

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².








This device works with a 1-phase connection (230 V +/- 10 %).


A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.


The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.


This function reduces the heat to the material. It is primarily suitable for welding thin plates. If MIG welding is used, it is perfect for aluminium welding.


The frequency of impulses during pulse mode.


A welding method in which the arc is maintained through an electrical current supplied from a non-consumable electrode. The arc is protected from the access of air by an inert gas.

Show moreShow less

Electrode welding with a coated electrode.




Used to switch the pulse function on and off.


By using the SHIFT key the welding mode can be selected.


The LED lights to indicate that the actual voltage is 10% or more than the value of the supply voltage.

What type of ignition does this welding machine use?

The welding machine uses high-frequency ignition, meaning that it is not necessary for the device to make direct contact with the workpiece in order to ignite the arc.

Can I also use the device while wearing welding gloves?

Yes, the large dials and easy-to-reach toggle switches allow you to use the device even while wearing welding gloves.

5 Based on 4 reviews

Sort by...

Leave a review (5 stars is highest, 1 is lowest)
Click on the link sent to your e-mail address and confirm your opinion! It will be published after verification.

The fields marked with * are required.

Reviews from Adriano (14 Dec 2021)
Reviews from Adriano (14 Dec 2021) Soddisfatto però ...

Mi è arrivata nei tempi previsti imballo perfetto sulla saldatrice dopo l'apertura c'era un ammaccatura che evidentemente era stata fatta prima dell'imballo. Poco male provata i mma funziona perfettamente a tig la proverò. Sono rimasto male poiché quando l'ho ordinata costava 279, con lo sconto di 15 euro 261.il giorno dopo costava 259 e con lo sconto di 15euro l'avrei pagata 244euro........pazienza!

expondo experts reply 10 Mar 2022

Grazie per il tuo feedback. Lavoriamo quotidianamente per migliorare i nostri prodotti e servizi.

Reviews from Anonym (12 Jun 2020)
Reviews from Anonym (12 Jun 2020) Gutes Gerät !

Für meine Zwecke zum elektrodenschweissen gut und kompakt. Die wig Funktion mit dem Brenner und der taktoption und gasnachströmung isch perfekt. Argon besorgen und gleich kanns losgehen. P3np

Reviews from Anders (11 Jun 2020)
Reviews from Anders (11 Jun 2020) TIG-svets 180 A

Liten och smidig, perfekt för hemma fixaren.

Reviews from Anonym (29 Apr 2020)
Reviews from Anonym (29 Apr 2020) Et godt lille tigværk , nem og enkel betjeningmKEbp

expondo expert

Still not sure?

Our experts are ready to help!
01633 603530
Mon - Fri 09:30am - 04:30pm
Welding Cart - 3 Drawers - 75 kg
Prices incl. VAT Shipping costs abroad not included
Schweißhelm – Sub Zero – EASY SERIES - 2981 - 1
Prices incl. VAT Shipping costs abroad not included
This product
  • TIG DC / MMA
  • 180 A - 230 V
  • Duty cycle 60 %
  • Pulse frequency
  • Gas post-flow time: 1 - 5 sec

Ready to ship today, Delivery time appr. 6-10 working days

TIG Welder - 180 A - Pulse - 60 % Duty Cycle

TIG Welder - 180 A - Pulse - 60 % Duty Cycle


Ready to ship today, Delivery time appr. 6-10 working days

  • TIG DC / MMA
  • 180 A - 230 V
  • Duty cycle 60 %
  • Pulse frequency
  • Gas post-flow time: 1 - 5 sec