Plasma Cutter Set - 50 A - welding helmet - protective clothing

Manufacturer: Stamos Power ² | Item number: EX18000301 | Model: S-Cutter 50 Plasma Set 1

Plasma Cutter Set - 50 A - welding helmet - protective clothing
Plasma Cutter Set - 50 A - welding helmet - protective clothing
Plasma Cutter Set - 50 A - welding helmet - protective clothing
Plasma Cutter Set - 50 A - welding helmet - protective clothing
Plasma Cutter Set - 50 A - welding helmet - protective clothing
Plasma Cutter Set - 50 A - welding helmet - protective clothing
Plasma Cutter Set - 50 A - welding helmet - protective clothing
Plasma Cutter Set - 50 A - welding helmet - protective clothing
Tap to open gallery
£429.00

Prices incl. VAT

  • Free shipment to UK

    ?

    This product is currently not available.

  • 30 days return service

    ?
  • 3 years guarantee

Product highlights

  • Cutting current: 10 – 50 A
  • Cutting capacity up to 12 mm
  • Cutting width: 1 mm
  • Cutting parameters display
  • Incl. protective clothing

Whether you're cutting steel, aluminium or copper or their alloys, with the plasma cutter S-Cutter 50 you can make effortlessly precise cuts up to a cutting depth of 12 mm. The arch for cutting is generated via the reliable contact ignition. The MOSFET inverter convinces with its high efficiency, at which the current is kept constant.

Show more Show less

The settings for plasma cutting are easy to control via the clearly-laid-out control panel. The cutting current of 10 to 50 A can be set using a continuous dial, the current value of which is clearly shown on the large LCD display. The air pressure is also defined using a control knob and can be read via a pressure gauge. This allows you to effortlessly adjust both values even when wearing welding gloves.

Show more Show less

The welding torch is ergonomic and can be easily positioned and moved during cutting. This gives you control over the chosen shape while cutting metal and enables precise and uniform cuts. The 5 metre-long cable also gives you exceptional mobility.

Show more Show less

Air is used as plasma for the arc, so that the device has particularly low operating costs. The powder-coated steel sheet housing and the compact design make the plasma cutter a durable helper for metal working in industry, craft, or for hobbyists. You can easily carry the device to every job site with the help of the handle.

Show more Show less

This set includes numerous spare parts for the plasma cutter which can wear out when cutting with high heat. The assortment includes three ceramic nozzles, 12 electrodes, 12 cutting nozzles and three ceramic rings. This ensures that you always remain operational, even during extensive cutting operations.

Show more Show less

Safety comes first when welding, which is why a welding helmet is indispensable to protect yourself from bright light, but as well as from welding spatter. The set includes the LEGEND welding helmet from the Professional series, which is very lightweight at approx. 500 g and can be adjusted to any head shape. The automatic welding helmet works with a particularly wide range of light protection, which can be adjusted from DIN 4 - 8 or from DIN 9 - 13. It convinces with a reaction time of 1/30,000 seconds. It offers a field of view of 100 x 65 mm so that you always have a full view during welding.

Show more Show less

The hood included in the set is intended to be used as a supplement to your welding helmet to protect your head and neck. The hood is made of high-quality flame-retardant 11 OZ cotton fabric and is sewn with heat-resistant synthetic threads. The inner lining is made of comfortable cotton mesh and impresses with its exceptional cool wearing comfort.

Show more Show less

Both the head and the hands need to be protected from welding spatter and sparks when welding. The Type A welding gloves in size 10 / XL will provide maximum protection. They are made of cow split leather and stitched with synthetic threads, which provide reliable protection against glowing metal spatter and other thermal effects. The soft cotton lining and denim-lined cuffs ensure maximum comfort as you work.

Show more Show less

  • Continuously adjustable cutting current up to 50 A
  • Control—easy-to-read control panel with LCD display
  • Professional welding helmet with high light protection
  • Comprehensive spare parts set
  • Incl. welding hood and welding gloves

Plasma Cutter Set - 50 A - welding helmet - protective clothing

With the plasma cutter S-Cutter 50 from Stamos Power you have all parameters for cutting conductive metals safely in view. At the same time, it convinces with its outstanding cut quality. With a duty cycle of 60 % at 50 A it can prove its sustained performance. A welding helmet, welding hood, welding gloves and an assortment of spare parts complete with set, making it the comprehensive solution when you want to cut metal professionally.

Model
S-Cutter 50 Plasma Set 1
Item number
18000301
Condition
New
Plasma cutter S-CUTTER 50
Functions
TIG AC / DC, MMA
Rated input voltage
230 V, 1 phase(s)
Frequency
50/60 Hz
Rated input current
28.7 A
Max. input current
37.2 A
Rated input power
6.2 kVA
Max. input power
8 kVA
Open circuit voltage
244 V
Ignition
Contact
Cutting current
10 - 50 A
Operating time / duty cycle
60 %
Cutting current at 100% DC
38.7 A
Cutting current at 60% DC
50 A
Cutting power
12 mm
Cutting width
1 mm
Air flow
175 L/min
Air pressure
5 - 6 bar
Power factor
≥ 0.85
Length, ground cable
3 m
Length, cable assembly
5 m
Length, power cable
2 m
Insulation class
F
Protection class
IP21
Device cooling
Fan
Plasma spare parts set
Ceramic nozzles
3
Ceramic rings
3
Electrodes (long)
12
Cutting nozzles
12
Welding helmet LEGEND
Material
Plastic
Head fit
Adjustable
Distance between face and visor
Adjustable
Field of vision
100 x 65 mm
Arc sensors
4
Power supply
Solar and 2 x CR2450 batteries
Light protection
DIN 4 - 8 / DIN 9 - 13
Safety standard
DIN 3
Switching speed
1/30,000 sec
Delay (lightening)
0.25 - 0.8 s
Min. welding current
3 A
Optical class
1
Scattered light
2
Homogeneity
1
Angle dependency
1
Grinding mode
Yes
Operating temperature
-10 to +55 °C
Storage temperature
-20 to +70 °C
Welding gloves SWG03-TITAN
Material
Cow split leather
Lining
Soft cotton
Material, threads
Synthetic fibres
Category
2
Size
10
Type
Type A
EN 12477 A
EN 388 and EN 407 combined requirements
EN 420
General requirements for protective gloves
EN 388 (4 5 2 2)
Protection against mechanical risks
Abrasion resistance
4
Cut resistance
5
Tear resistance
4
Puncture resistance
4
EN 407 (4 1 3 x 4 x)
Protection against thermal risks
Flammability resistance
4
Contact heat resistance
1 (up to 100 °C)
Convective heat resistance
3
Resistance to small splashes of molten metal
4
Welding hood SWH01
Material
Flame-retardant 11 OZ cotton fabric
Lining
Cotton mesh
Material, threads
Synthetic fibres
Category
1
Size
Universal
Fire protection
A1 A2
Delivery Package

Plasma cutter S-CUTTER 50.1

  • Plasma torch with cable assembly, 5 m
  • Gas hose, 3 m
  • Ground cable with clamp, 3 m
  • Plasma electrode
  • Cutting nozzle
  • 2 clamp rings
  • Instruction manual

Spare parts set

  • 12 electrodes
  • 12 cutting nozzles
  • 3 ceramic nozzles
  • 3 ceramic rings

Welding helmet LEGEND

Welding gloves SWG03-TITAN

Welding hood SWH01

 
MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Show moreShow less
 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
CUTTING TORCH CONNECTION

 

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
WELDING CURRENT

 

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH

 

 
DISPLAY

Shows the welding / cutting parameters.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

 
PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

Is the plasma cutter easy to transport?

Yes, the device is relatively light and has a convenient handle.

Write the first review for this product



Leave a review
Evaluations will be activated after verification.

The fields marked with * are required.

expondo expert

Still not sure?

Our experts are ready to help!
020 376 988 02
Mon - Fri 09:30am - 04:30pm
This product
  • Cutting current: 10 – 50 A
  • Cutting capacity up to 12 mm
  • Cutting width: 1 mm
  • Cutting parameters display
  • Incl. protective clothing

This product is currently not available.

Plasma Cutter Set - 50 A - welding helmet - protective clothing

Plasma Cutter Set - 50 A - welding helmet - protective clothing

£429.00  

This product is currently not available.

  • Cutting current: 10 – 50 A
  • Cutting capacity up to 12 mm
  • Cutting width: 1 mm
  • Cutting parameters display
  • Incl. protective clothing
  • Plasma
  • Power
  • 400 V
  • Cutting current: 10 - 70 A
  • Cutting thickness: 20 mm

Ready to ship today, Delivery time appr. 1-2 weeks

Plasma Cutter - 70 A - 400 V

Plasma Cutter - 70 A - 400 V

(1)
Instead of: £399.00   £359.00  

Ready to ship today, Delivery time appr. 1-2 weeks

  • Plasma
  • Power
  • 400 V
  • Cutting current: 10 - 70 A
  • Cutting thickness: 20 mm