Plasma cutter with compressor - 40 A - ED 60% - Digital - 230 V
£589.00 Prices incl. VAT

Plasma cutter with compressor - 40 A - ED 60% - Digital - 230 V

Manufacturer: Stamos Power ² | Item number: EX10020150 | Model: S-CUTTER 40

Plasma cutter with compressor - 40 A - ED 60% - Digital - 230 V
Plasma cutter with compressor - 40 A - ED 60% - Digital - 230 V
Plasma cutter with compressor - 40 A - ED 60% - Digital - 230 V
Plasma cutter with compressor - 40 A - ED 60% - Digital - 230 V
Plasma cutter with compressor - 40 A - ED 60% - Digital - 230 V
Plasma cutter with compressor - 40 A - ED 60% - Digital - 230 V
Plasma cutter with compressor - 40 A - ED 60% - Digital - 230 V
360° photo
Tap to open gallery
£589.00

Prices incl. VAT

  • Free shipment to UK

    ?

    Ready to ship today, Delivery time appr. 6-10 working days

  • 30 days return service

    ?
  • 3 years guarantee

Product highlights

  • Cutting current: 14 – 40 A
  • Duty cycle 60%
  • Cutting power up to 12 mm
  • Digital cutting current display
  • 2T/4T

For plasma cutting with air pressure, you can choose a cutting current of up to 40 A. At the duty cycle of 60% the cutter is powered by up to 40 A. The power can be regulated down to 34 A and you can cut without pauses. The long duty cycle is possible due to the optimal cooling of the device.

Show more Show less

The clear control panel allows you to easily and precisely control all the values ​​you need for plasma cutting. The large ON / OFF switch starts the compressor and activates the plasma cutter. You can use the digital selection button to perform a compressed air test and choose between 2-stroke and 4-stroke operation of the cutting torch.

Show more Show less

A rotary knob precisely adjusts the ampere strength. The selected value is clearly displayed on the large LED display. The cutting current can be controlled accurately and repeatedly for a large variety of metals. All buttons and the knob are arranged so that they can easily be operated with welder gloves.

Show more Show less

Depending on the metal, a cutting depth of up to 12 mm is possible. The 4.85 m cable of the high-quality PT-31 burner allows for a maximum freedom of movement when cutting joints or metals. The compressor operates at a working pressure of 4 - 5 bar, which is held automatically and ensures a stable arc for cutting. When the cutting process is completed, the gas post-flow time of up to five seconds ensures the optimum cooling of the nozzle and thereby minimises its wear.

Show more Show less

The device has an overheat protection, which is indicated by an LED diode. The protective function shuts off the device if the heat increases due to a malfunctioning. It will also spring into action when the duty cycle of the selected ampere strength is exceeded. The diode lights up and the plasma cutter is switched off. In both cases the air cooling remains active. Once the normal working temperature has been reached again, you can continue your work.

Show more Show less

A welding cart is advisable for the transport of the device, but the plasma cutter can also easily be moved with its practical carrying handle. Since it's a 2 in 1 device, you do not have to carry an extra compressor!

Show more Show less

  • 2 in 1 device: Plasma cutter with an integrated compressor
  • Long duty cycle of 60% at 40 A
  • Digital panel for 2T / 4T and the test gas function
  • Precise and repeatable, due to the LED display: Cutting current seamlessly adjustable
  • Safe, with an overheat protection

Plasma cutter with compressor - 40 A - ED 60% - Digital - 230 V

A plasma cutter and a compressor - the S-CUTTER 40 combines both and reliably cuts conductive metals such as copper, stainless steel, steel, aluminium or brass. You don’t need an additional compressor as with other models. The device has a long duty cycle and a clear digital control panel.

Model
S-CUTTER 40
Condition
New
Voltage / Frequency
230 V / 50 Hz
Rated input current
16.4 A
Max input current
22.1 A
Max input power
3.9 kVA
Open-circuit voltage
230 V
Cutting current
14 – 40 A
Duty Cycle
60 %
Cutting current at 60 % DC
40 A
Cutting current at 100 % DC
31 A
Ignition
HF - High frequency
Max cutting power
12 mm
High-quality cutting results
6 mm
Cutting width
1 mm
Gas post flow time
2.5 or 5 s
Material, casing
Steel, plastic
Model, cutting torch
PT-31
Type of compressor
Oil-free
Power, compressor
750 W
Voltage / Frequency, compressor
230 V / 50 Hz
Electricity, compressor
3.4 A
Capacity, compressor
20 μF
Working pressure
4 - 5 bar
Length, ground cable
3 m
Cutting torch
4.85 m
Cooling
Ventilator
Insulation class
F
Protection class
IP 21
Dimensions (LxWxH)
21.00 x 41.50 x 61.00 cm
Weight
26.45 kg
Shipping dimensions (LxWxH)
54.00 x 31.00 x 75.00 cm
Shipping weight
33.10 kg
Delivery Package
  • Plasma cutter with compressor S-Cutter 40
  • Earth cable: 3 m
  • Cutting torch PT-31 with cable: 4.85 m
  • Electrode
  • Nozzle
  • Power cable 1.9 m
  • Instruction manual
  • Air filter
 
MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
CUTTING TORCH CONNECTION

 

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
NON-CONTACT HF-IGNITION

A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

Show moreShow less
 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH

 

 
PARAMETERS / FUNCTION SELECTION

 

 
"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

 
DISPLAY

Shows the welding / cutting parameters.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

What is the maximum thickness of a workpiece that the plasma cutter can cut?

You can cut metals of up to 12 mm with the plasma cutter.

Do I need an extra compressor for the device?

No, the compressor has been integrated into the plasma cutter S-CUTTER 40.

How does the device tell me when there is an overheating problem?

The plasma cutter has a safety LED that lights up when there is a malfunctioning because of overheating, or when the duty cycle exceeds the selected amps. In both cases the device will shut down.

5 Based on 3 reviews

Sort by...

Leave a review (5 stars is highest, 1 is lowest)
Click on the link sent to your e-mail address and confirm your opinion! It will be published after verification.

The fields marked with * are required.

Reviews from Clemme´s Multiservice ApS (3 Oct 2021)
Reviews from Clemme´s Multiservice ApS (3 Oct 2021) Alle tiders køb

Skærer ganske udemærket op til ca 10-12 mm . Fedt med den indbyggede kompressor, og så fylder den ikke ret meget på værkstedet. Der kunne dog godt have fulgt et skærehjul og måske et land. Men alt i alt en mega fed maskine, blev positivt overrasket til prisen.

Reviews from FLORENCIO (16 Aug 2020)
Reviews from FLORENCIO (16 Aug 2020) Parfait

Rien à dire, parfait au niveau qualité prix. Travail de précision, coupure nette.

Reviews from Amazon Customer (12 Aug 2019)
Reviews from Amazon Customer (12 Aug 2019) Compacto y eficiente.

Es un regalo para mi marido, y está muy contento con el plasma, ha complido sus expectativas.

expondo expert

Still not sure?

Our experts are ready to help!
01633 603530
Mon - Fri 09:30am - 04:30pm
Plasma Spare Parts Set - CUT 40 50 - small
£42.99
Prices incl. VAT Shipping costs abroad not included
Welding filter for BlackONE, Metalator
Instead of: £75.00
£59.00
Prices incl. VAT Shipping costs abroad not included
This product
  • Cutting current: 14 – 40 A
  • Duty cycle 60%
  • Cutting power up to 12 mm
  • Digital cutting current display
  • 2T/4T

Ready to ship today, Delivery time appr. 6-10 working days

Plasma cutter with compressor - 40 A - ED 60% - Digital - 230 V

Plasma cutter with compressor - 40 A - ED 60% - Digital - 230 V

(3)
£589.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Cutting current: 14 – 40 A
  • Duty cycle 60%
  • Cutting power up to 12 mm
  • Digital cutting current display
  • 2T/4T
  • Cutting current: 10 - 50 A
  • Duty cycle: 60 %
  • Cutting depth: 15 mm
  • LED display
  • 230 V

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter - 50 A - 230 V - Basic

Plasma Cutter - 50 A - 230 V - Basic

(4)
£339.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Cutting current: 10 - 50 A
  • Duty cycle: 60 %
  • Cutting depth: 15 mm
  • LED display
  • 230 V
  • Plasma
  • Power
  • 230 V
  • Cutting current: 10 - 50 A
  • Cutting thickness: 12 mm

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter - 50 A - 230 V

Plasma Cutter - 50 A - 230 V

(3)
£319.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Plasma
  • Power
  • 230 V
  • Cutting current: 10 - 50 A
  • Cutting thickness: 12 mm