TIG welding machine S-ALU 315 - 315 A - 400 V
£885.00

TIG welding machine S-ALU 315 - 315 A - 400 V

Manufacturer: Stamos Power ² | Item number: EX10020160 | Model: S-ALU 315

£885.00

Prices incl. VAT Shipping costs abroad not included*

  • Free shipment to UK

    ?

    Ready to ship today, Delivery time appr. 4-6 workdays**

  • 30 days return service

    ?

Product Highlights

  • TIG and MMA welding
  • Welding current 20 - 315 A
  • Inverter (AC / DC)
  • 2T / 4T switch
  • Air cooling
Model
S-ALU 315
Article number
2160
Condition
New
Rated input voltage
400 V
Input frequency
50 Hz
Input current
8,2 A (TIG) 11,9 A (MMA)
Input current max.
15,2 A
Power input
7500 W (at 100%)
Input power max.
9800 W (at 40%)
Open circuit voltage
72 V
Welding current TIG-DC
20 - 315 A
Welding current TIG-AC
20 - 315 A
Welding current MMA
20 - 315 A
Duty Cycle
TIG: 40 % / MMA: 40 %
Welding current at 100% DC
TIG: 199 A / MMA: 170 A
Welding current at 60% DC
WIG: 256 A / MMA: 219 A
Welding current at 40% DC
WIG: 315 A / MMA: 270 A
Pulse current
20 – 315 A
Pulse frequency (AC mode)
0,5 ÷ 5 Hz
Pulse frequency (DC mode)
0,5 ÷ 5 Hz
Pulse width
10 ÷ 90 %
Frequency of welding current (AC)
50 – 65 Hz
Current Balance (AC)
20 – 315 A
Balance (AC) – Clean Width
20% - 80%
Protective gas solenoid valve
Yes
Gas post-flow time
1 ÷ 10 s
Electrode diameter (TIG)
2,4 mm x 175 mm (rot)
Electrode diameter (MMA)
1,6 – 5,0 mm
Ignition (TIG)
20 A – 315 A
ARC-Force
No
Hot Start
No
Anti-Stick
No
Foot pedal connection
Yes
Switch for 2/4-cycle operation
Yes
Cooling device
Fan
Torch cooler
Air
Welding strength
8300 W
Power factor
0,93
Efficiency (under rated power)
0,85
Protection class
F
Insulation class
IP 21
Dimensions (LxWxH)
55 x 25.5 x 53 cm
Weight
26.5 kg
Shipping dimensions (LxWxH)
80 x 32.5 x 59 cm
Shipping weight
35.5 kg
Technische Zeichnung
Delivery Package
  • Welding tool S-ALU 315
  • Gas hose 3 m
  • Electrode holder with cable 3 m
  • Ground cable with clamp 3 m
  • TIG torch with hose pack 4,8 m
  • Power cable 1.9 m without power plug
  • Welding mask with handle
  • tungsten electrode
  • Long burning cap
  • Short burner cap
  • 3 gas nozzles
  • 3 clamping sleeves
  • 1 clamping sleeve housing
  • 2 clamping rings
  • Slag hammer with brush
  • Small bag for accessories
 
MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
PROTECTIVE GAS

TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.

Show moreShow less
 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
MMA WELDING CABLE CONNECTOR

 

 
TIG TORCH CONNECTOR

 

 
FOOT PEDAL CONNECTOR

This unit can also be operated using a foot pedal.

 
SUPPLY VOLTAGE

This device works with a 3-phase connection (400 V +/- 10 %).

 
NON-CONTACT HF-IGNITION

A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.

 
STARTING CURRENT

Value of the arc ignition output current. This current can be adjusted at will. For precision welding, it is recommended to start with reduced power, weld smoothly and eventually adjust the current accordingly.

Show moreShow less
 
WELDING CURRENT

 

 
FINAL CURRENT

The output current value before the end of the weld. Welding with the final current helps prevent a crater forming at the end of the weld.

 
GAS POST-FLOW TIME

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

 
PULSE

This function reduces the heat to the material. It is primarily suitable for welding thin plates. If MIG welding is used, it is perfect for aluminium welding.

 
PULSE FREQUENCY

The frequency of impulses during pulse mode.

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

Show moreShow less
 
TIG WELDING

A welding method in which the arc is maintained through an electrical current supplied from a non-consumable electrode. The arc is protected from the access of air by an inert gas.

Show moreShow less
 
MMA WELDING

Electrode welding with a coated electrode.

 
POWER SWITCH

 

 
"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

 
TIG AC/DC MODE SWITCH

TIG welding is divided into AC (alternating current) and DC (direct current) welding.

 
PULSE FUNCTION SWITCH

Used to switch the pulse function on and off.

 
SWITCH BETWEEN THE WELDING METHODS

By using the SHIFT key the welding mode can be selected.

 
DISPLAY

Shows the welding / cutting parameters.

Write the first review for this product



Leave a review
Evaluations will be activated after verification.

The fields marked with * are required.

Gesamtansicht 1 von Schweißwagen - 75 cm
£99.00
Prices incl. VAT Shipping costs abroad not included