Welding Set CNC Plasma Cutter - 85 A - 400 V - Pilot Ignition + Welding helmet –Pokerface - PROFESSIONAL SERIES

Item number: EX18000199 / Model:

Welding Set CNC Plasma Cutter - 85 A - 400 V - Pilot Ignition + Welding helmet –Pokerface - PROFESSIONAL SERIES

  • Item number: EX18000199
  • Model:
  • In the product range since: 2003

Prices incl. VAT Shipping costs abroad not included*

This product is currently not available.

Welding Set CNC Plasma Cutter - 85 A - 400 V - Pilot Ignition + Welding helmet –Pokerface - PROFESSIONAL SERIES

You will save up to 3% when purchasing this set, compared to a single item order


The plasma cutter S-PLASMA 85CNC by Stamos Germany was conceived for professional use at CNC machines manual, but it is also suitable for manual operation. This device has a 380 volt power current connection with 3 phases. The plasma cutter S-PLASMA 85CNC captivates through numerous distinguishing features such as powder-coated steel iron housing, a high economic efficiency and a first-class cutting quality. Due to a thermal overload protection you are always on the safe side when cutting. This also guarantees a high level of safety and maximum reliability. The plasma cutter works with an adjustable cutting current in the range of 20 to 75 amps. Therefore, you can easily cut materials with a thickness of up 27 mm. The plasma cutter S-PLASMA 85 CNC by Stamos Germany uses the state-of-the-art bipolar transistor technology (IGBT). This ensures a high robustness against short-circuits since IGBT limits the load current.

Another advantage is the fine and clean cut of the plasma cutter S-PLASMA 85 CNC by Stamos Germany. You can cut everything – from thin sheet metals up to steel plates! Thanks to high cutting speeds and “fast start function”, split cuts and quality cuts are no problem. The professional plasma cutter S-PLASMA 85 CNC offers a multitude of qualities and outstanding characteristics which provide a perfect utilisation in various fields of applications.

PLEASE NOTE: The plasma cutter S-PLASMA 85 CNC was conceived for professional use at CNC machines! Also, there is the possibility to operate the device manually by hand. However, using the cutter in connection with a CNC machine is preferred since the torch does not have a bent top but rather is straight throughout.


With most manufacturers there are problems with high frequency interference when it comes to CNC plasma cutters. The high-frequency high pressure arc produces an unavoidable interference. In order to exclude this interference and to ensure proper usage and governance of the device the CNC plasma cutter S-PLASMA 85 CNC by Stamos Germany features the latest technology in avoidance of any interference whatsoever. Due to the advanced interior construction of the CNC plasma cutter disturbances are avoided or reduced. For that reason, the plasma cutter is especially convincing in combination with a CNC machine and therefore forms a perfect synergy. Even minor interferences in the system can seriously compromise longevity and functionality. Buy the professional plasma cutter by Stamos Germany today! With products from Stamos Germany you are always on the safe side – both now and in the future.

  • professional device
  • 85 ampere cutting performance
  • pilot arc
  • 380 volt power current connection
  • power fans for cooling
  • bipolar transistor technology (IGBT)
  • overheating protection
  • digital display (LED)
  • the latest available technology
  • powder-coated steel iron housing
  • including accessories
  • high voltage plug not included


Welding helmet

The Pokerface welding helmet by the Professional Series from Stamos Germany - the best choice for professional and hobby welders

The automatic Pokerface welding helmet from the Professional Series from Stamos Germany is characterized by its light weight and good response speed. The welding helmet is extremely versatile and can be used within all common welding processes (MIG welding, MAG / CO2 welding, manual welding, TIG welding, plasma cutting and micro plasma cutting).

In addition, the automatic welding helmet Pokerface is known for its long-lasting visibility (cartridges). The cartridges are powered by solar cells and a CR2450 battery. The welding helmet works with a particularly wide range of light protection, which can be flexibly adjusted from DIN 4 - 8 or from DIN 9 - 13. The size of the screen is an extraordinary 100 x 65 mm. In this way, you can always keep an overview of all the essential details.

The welding helmet is made of robust plastic. This ensures that the welding mask weighs only about 500 grams and that you do not have to worry about any restrictions or pain during work. A particularly prominent characteristic of the Pokerface is the simple adaptation to every head shape. Also adjustable is the distance between the face and the visor. This guarantees that the helmet sits extremely securely and can be used first-class.

In addition, Professional Series welding helmets have an outstanding response time of 1 / 30,000 seconds from light to dark. This means that you are always protected from dangerous arcs. The outstanding reaction time also allows for a seamless transition without the eyes being too stressed or requiring a prolonged adaptation time.

The automatic welding helmet Pokerface can be used with all common welding procedures and also has a practical grind mode. Thus, the helmet can be used for pure roughing, cutting and grinding work without an annoying up-and-down. Pokerface stands out as early as 3 amps. Whether you are an artisan, or want to use the welding helmet for private use or to be used in the workshop, the Pokerface combines all the necessary protection mechanisms and impresses with its quality and longevity.

  • Adjustable helmet
  • Visor-face distance adjustable
  • Light protection DIN 4 – 8 or DIN 9 - 13
  • 100 x 65 mm field of view
  • Viewing angle adjustable
  • Light protection for all common welding processes
  • Delay time (0.25 - 0.8 s)
  • Switching time 1 / 30,000 s
Input voltage
380 V, 3 phases
50/60 Hz
Input voltage
19 A
Open-circuit voltage
123 V
Degree of housing protection
Insulation class
Overvoltage protection
Magnetic valve
Duty cycle at max. A
60 %
Cutting current
20 - 85 A
Non - Contact
Cutting depth
up to 27 mm (dependent on material)
Cutting width
1,2 mm
Compressor connection
5,5 bar, 175 l/min.
Over current fuse
Dimension (LxWxH)
56 x 22 x 37 cm
20.1 kg
Shipping dimension (LxWxH)
65.5 x 37.5 x 45 cm
Shipping weight
26.5 kg


Article number
Head fitting
Field of view
100  x 65 mm
Arc sensors
Power supply
Solar and 1 x battery CR2450
Light protection
DIN 4 – 8 / DIN 9 - 13
Light level
Switching time
1/30.000 s
Delay (when lightened)
0,25 - 0,8 s
Minimum welding current
3 A
Optical class
Scattered light
Viewing angle dependency
Operating temperature
-10 to +55 °C
Storage temperature
-20 to +70 °C
Dimensions (LxWxH)
56 x 22 x 37 cm
20.1 kg
Shipping dimensions (LxWxH)
65.5 x 37.5 x 45 cm
Shipping weight
26.5 kg

IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.


Powerful fans ensure an optimal removal of heat from the unit.


For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.


On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².






This device works with a 3-phase connection (400 V +/- 10 %).


The CNC connector is designed to connect the plasma cutter to CNC controls. Once connected, it will signal the THC module, which controls the height of the burner.




The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.


Start the weld by placing pressure on the torch button. Stop the process by releasing the button.


By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.


The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.




Choose between the 2T and 4T mode.


Shows the welding / cutting parameters.


The LED light indicates overheating or a malfunction.


The LED lights to indicate that the network connection of the phase has failed.


Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.


A pilot arc is ignited by pressing the torch's trigger. Thus, grates can be cut.

  • S-Plasma 85CNC
  • plasma hose package: 5 m
  • air hose: 4 m
  • ground cable: 3 m
  • 5 cutting nozzles
  • 5 electrodes for plasma
  • manometer
  • pressure regulator
  • instruction manual


  • Welding helmet "Pokerface"
  • Instruction manual

Write the first review for this product

Leave a review
Evaluations will be activated after verification.

The fields marked with * are required.