DC Power Supply Unit - 315 Watt
£195.00

DC Power Supply Unit - 315 Watt

Manufacturer: Stamos Soldering | Item number: EX10020146 | Model: S-LS-24

DC Power Supply Unit - 315 Watt
DC Power Supply Unit - 315 Watt
DC Power Supply Unit - 315 Watt
DC Power Supply Unit - 315 Watt
360° photo
£195.00

Prices incl. VAT Shipping costs abroad not included*

  • Free shipment to UK

    ?

    Ready to ship today, Delivery time appr. 4-6 workdays**

  • 30 days return service

    ?

Ready for immediate shipping When ordering and making payment within the next 10 hours 25 mins, shipping will happen today.

Product Highlights

  • Dimensions: 39.6 × 24.8 × 18 cm
  • Power: 315 W
  • Coarse and fine adjustment
  • 2 LED displays
  • Protection against overheating
 

The power supply unit has three different modes: The parallel, serial and individual mode. The individual mode has two different channels of 30 volts and 5 amps, the serial mode has a double voltage of 60 volts and the parallel mode can be used with only one channel with the double power of 10 amps. The performance of the power supply unit can be adjusted to your individual needs.

Show moreShow less

Precise and accurate results with the power supply unit set S-LS-24 from Stamos Soldering

 

The power supply unit has three ports each for positive and negative current that allows for a corresponding distribution of current voltage towards external devices. All three ports, and therefore several devices, can be used at the same time. The power supply unit can be used as a power source and as a current sink.

Show moreShow less
 

Two large LED displays show the adjusted current strength and the current voltage. The data on the LED displays has four digits, thereby being extremely precise. In addition, the values are shown with their corresponding acronyms, clearly separating current voltage and amperage.

Show moreShow less
 

The power supply unit has high safety standards: The device has a special overheat protection. An integrated ventilator is activated as soon as the maximum temperature of 45 °C is surpassed. The safety system guarantees a safe handling of the power supply unit, even with prolonged and intense usage.

Show moreShow less
 

The current voltage for the adjustable channel III can be further adjusted via a separate switch. It is therefore possible to reach different voltages of 2.5, 3.3 or 5 volts with the same channel. The power supply unit can be used in a precise and individually adjusted way, thanks to its additional fine-tuning, and provide the perfect service.

Show moreShow less
 

The desired current strength can be adjusted with special rotary knobs. The knobs can adjust the current strength as precisely as you need it to be, thereby guaranteeing the ideal amount of power. You can observe the respective values on the LED display during the configuration and adjust them to your needs.

Show moreShow less
 

The power supply unit is made from robust sheet steel and guarantees a high durability and service life. Non-slip rubber knobs ensure a sturdy footing and protect surfaces against scratches. The power supply unit is transportable and its low tare weight of only 9.5 kg means it can be employed in many different locations. The power supply unit S-LS-24 from Stamos Soldering is a professional device for an individually adjustable DC power supply of various external devices and machines.

Show moreShow less

Highlights

  • Power supply unit with parallel, serial and individual modes
  • Three outputs each, for positive and negative current
  • Two large LED displays
  • Incl. overheat protection
  • Separate current voltage switch with three levels
  • Precise fine adjustment of the current strength with a rotary knob

DC Power Supply Unit - 315 Watt

The power supply unit S-LS-24 from Stamos Soldering is specialized for providing external devices with a direct current. The current strength and the current voltage are individually adjustable. The device has been designed for professional and industrial use, in labs, the telecommunication sector, workshops with electronic devices and production plants.

Model
S-LS-24
Item number
10020146
Condition
New
Voltage
230 V / ~ 50 Hz
Frequency
~ 50 Hz
Power
315 W
Output voltage
0 - 15 V
Output current
0 – 1 A
Operating temperature
0 °C - 40 °C
Storage temperature
-20 °C - -80 °C
Cable length
130 cm
Relative humidity, operation
< 80%
Relative humidity, storage
< 80%
Insulation resistance
≥ 100 MΩ
Leakage current
≤ 1 mA
Conduit I/II in individual mode:
DC-Power voltage area
0 - 31 V
Current area
0 – 5.2 A
Coefficient line regulation
CV ≤ 0.01 % + 1 mV
CC ≤ 0.2 % + 1 mA
Coefficient line regulation
under load
CV ≤ 0.01 % + 5 mV (I ≤ 3 A)
CV ≤ 0.01 % + 2 mV (I > 3 A)
CC ≤ 0.2 % + 5 mA (I ≤ 3 A)
CC ≤ 0.2 % + 10 mA (I > 3 A)
Ripple voltage
CV ≤ 0.5 mVrms (I ≤ 3 A)
CV ≤ 1 mVrms (I > 3 A)
CC ≤ 3 mArms (I ≤ 3 A)
CC ≤ 5 mArms (I ≤ 3 A)
Accuracy
± 0.5 % + 2
Conduit I/II in parallel mode:
Coefficient line regulation
≤ 1 mV 
Coefficient line regulation
under load
≤ 20 mV
Ripple voltage
CV ≤ 0.5 mVrms (I ≤ 6 A)
CV ≤ 1 mVrms (I > 6 A)
Product name
Power supply unit
Conduit I/II in serial mode:
Coefficient line regulation
≤ 1 mV
Coefficient line regulation
under load
≤ 30 mV
Ripple voltage
CV ≤ 0.5 mVrms (I ≤ 6 A)
CV ≤ 1 mVrms (I > 6 A)
Conduit III:
DC-Power voltage area
(2.5/3.3/5) ± 0.1 V
Current area
3 A
Coefficient line regulation
≤ 1 mV
Coefficient line regulation
under load
≤ 10 mV
Ripple voltage
≤ 1 mVrms
Dimensions (LxWxH)
39.5 x 25 x 17.1 cm
Weight
9.9 kg
Shipping dimensions (LxWxH)
46 x 35 x 25 cm
Shipping weight
10.9 kg
Technical drawing
Delivery Package
  • Power supply unit S-LS-24
  • Power supply cord
  • 2 test cords
  • Operating instructions

Write the first review for this product



Leave a review
Evaluations will be activated after verification.

The fields marked with * are required.

This product
  • Dimensions: 39.6 × 24.8 × 18 cm
  • Power: 315 W
  • Coarse and fine adjustment
  • 2 LED displays
  • Protection against overheating

Ready to ship today, Delivery time appr. 4-6 workdays**

DC Power Supply Unit - 315 Watt

DC Power Supply Unit - 315 Watt

£195.00  

Ready to ship today, Delivery time appr. 4-6 workdays**

  • Dimensions: 39.6 × 24.8 × 18 cm
  • Power: 315 W
  • Coarse and fine adjustment
  • 2 LED displays
  • Protection against overheating
  • Power: 550 W
  • Leakage current: ≤ 1 mA W
  • Temperature coefficient: ≤150
  • Overtemperature protection
  • Two multicoloured LED displays

Ready to ship today, Delivery time appr. 4-6 workdays**

Bench power supply - 0-30 V, 0-10 A DC, 550 W - 4 memory spaces

Bench power supply - 0-30 V, 0-10 A DC, 550 W - 4 memory spaces

£199.00  

Ready to ship today, Delivery time appr. 4-6 workdays**

  • Power: 550 W
  • Leakage current: ≤ 1 mA W
  • Temperature coefficient: ≤150
  • Overtemperature protection
  • Two multicoloured LED displays
  • Power: 900 W 2. Resolution: 100 mV / 10 mA
  • Low ripple, low noise
  • Overheat, overvoltage, overcurrent and overload protection
  • LED display

Ready to ship today, Delivery time appr. 4-6 workdays**

Laboratory Power Supply - 0-15 V - 0-60 A DC - 900 W

Laboratory Power Supply - 0-15 V - 0-60 A DC - 900 W

(1)
£219.00  

Ready to ship today, Delivery time appr. 4-6 workdays**

  • Power: 900 W 2. Resolution: 100 mV / 10 mA
  • Low ripple, low noise
  • Overheat, overvoltage, overcurrent and overload protection
  • LED display
  • Power: 900 W
  • Resolution: 1 mV / 0.1 mA
  • Low ripple, low noise
  • OLP, OVP, OCP, OTP, reverse polarity protection
  • Large LCD display

Ready to ship today, Delivery time appr. 4-6 workdays**

Laboratory Power Supply - 0-60 V - 0-15 A DC - 900 W - RS232 - 100 memory spaces

Laboratory Power Supply - 0-60 V - 0-15 A DC - 900 W - RS232 - 100...

£479.00  

Ready to ship today, Delivery time appr. 4-6 workdays**

  • Power: 900 W
  • Resolution: 1 mV / 0.1 mA
  • Low ripple, low noise
  • OLP, OVP, OCP, OTP, reverse polarity protection
  • Large LCD display