Plasma Cutter - 40 A - 230 V - digital - Pilot Ignition

Item number: EX10020075 / Model: PROLOX60-A

Gesamtansicht von Plasmaschneider - 40 A - 230 V - digital - Pilotzündung
Zoom
von hinten von Plasmaschneider - 40 A - digital - Pilotzündung
Bedienelemente von Plasmaschneider - 40 A - digital - Pilotzündung
Kabel von Plasmaschneider - 40 A - digital - Pilotzündung
360°

Plasma Cutter - 40 A - 230 V - digital - Pilot Ignition

  • Item number: EX10020075
  • Model: PROLOX60-A
  • In the product range since: 2008
£659.00  

Prices incl. VAT Shipping costs not included*

This product is currently not available.

Plasma Cutter - 40 A - 230 V - digital - Pilot Ignition

Plasma Cutter - 40 A - 230 V - digital - Pilot Ignition

We continue to rely on our innovative technology and introduce WELBACH - our brand of digital welding machines. The units use the fully digitally operated Stamos machine interface. High quality control panels ensure maximum comfort. The digital signal processors monitor all parameters so that the operations performed always exactly match the values set. The Welbach range plasma cutters are also equipped with original TRAFIMET® plasma torches.

Article
PROLOX60-A
Rated input voltage
1~230 V
Power frequency
50/60 Hz
Rated input current
20 A
Rated input power
4,3 kVA
No-load voltage
310 V
Cutting current
15 - 40 A
Rated duty cycle
60%
Air Requirement
4 - 6 bar, 175 l/min
Insulation grade
F
Protection grade
IP21S
Cutting thickness (carbon plate )
≤ 15 mm
Arc ignition mode
Non-Contact
Working pressure(kgf/cm2)
2,5~4
Weight (kg, netto)
15.35 kg
Weight (kg, brutto)(
17.1 kg
Dimension (cm, netto) (LxWxH)
44 x 18.5 x 32 cm
Dimension (cm, brutto) (LxWxH)
58 x 36 x 39 cm
Ignition
Low Frequency
 
IGBT

IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.

 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
MMA WELDING CABLE CONNECTOR

 

 
CUTTING TORCH CONNECTION

 

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
WELDING CURRENT

 

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH

 

 
PARAMETERS / FUNCTION SELECTION

 

 
PARAMETERS / FUNCTION CONTROL

 

 
"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

 
PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

 
PILOT IGNITION

A pilot arc is ignited by pressing the torch's trigger. Thus, grates can be cut.

2075-panel

 

 

  1. ON/OFF = Power Switch
  2. Indicator light 2T/4T
Option Nr 1:
 
2075-g1 off
 
2075-g2 off
2T - function - spotty cutting of full material
Option  Nr 2:
 
2075-g1 on
 

2075-g2 off

4T – function - continuous cutting of full material
Option Nr 3:
 
2075-g1 off
 
2075-g2 on

2T – function - spotty cutting of grid

Option Nr 4:
 
2075-g1 on
 
2075-g2 on
4T - function  - continuous cutting of grid

 

  1. LED Display = Displays the current amperage
  2. Working Indicator Light = It will be on during cutting operation
  3. Thermal Overload Indicator Lamp
  4. Trigger hold ON/OFF = Auto lock ON/OFF, Choosing "2T" or "4T" state
  5. Power Supply Controller (increase button)
  6. Power Supply Controller (decrease button)
  7. Mode Selector = Turns the air supply ON Prior to cutting
  8. Air pressure regulation
  9. Manometer
  10. grounding
  11. cutting torch connection

 

welbach-plasmaschneider-s45-1

welbach-plasmaschneider-s45-2

 



PLASMA - CUTTING TORCH
High cutting power and economic operation with or without HF ignition are the characteristics of our air- and water - cooled from plasma cutting torches. Some of the highlights from our plasma range are presented below.

The Ergocut series
The range of air-cooled plasma cutting torches with arc ignition without high frequency offers several advantages:

  • low electromagnetic interference
  • low electrical load on the torch
  • low risk of blockage during the mechanical-pneumatic motion for arc formation
  • longer life of wear parts
  • simple, effortless operation
  • mechanical protection when operating the switch


Technical data of the S45:

  • Volt Class: M
  • Length: 6 meters
  • Air consumption: 115 l/min
  • Air pressure: 5 bar
  • Duty Cycle 60%: 40A
  • Air pressure switch: 3.5 bar

 

 

welbach-plasmaschneider-s45-3

 

welbach-plasmaschneider-s45-4-uk

welbach-plasmaschneider-s45-5

The diverse assortment of products from Stamos enable you to cut or join materials efficiently and precisely. Our portfolio ranges from professional soldering stations to top-class welding machines and precise plasma cutters, to the matching accessories. Let us demonstrate to you the functionality, quality and versatility – not to mention the cost-effectiveness – of our professional line. Our videos show our products in action.

  • plasma cutter PROLOX 60-A
  • Ergocut S45 torch by trafimet