Welding Set Aluminuim Welder - 315 A - 400 V - Pulse - Water Cooler + Welding helmet – Metalator - EXPERT SERIES

Item number: EX18000180 / Model:

Welding Set Aluminuim Welder - 315 A - 400 V - Pulse - Water Cooler + Welding helmet – Metalator - EXPERT SERIES

  • Item number: EX18000180
  • Model:
  • In the product range since: 2004
£2,235.00  

Prices incl. VAT plus shipping costs*

Ready to ship today, Delivery time appr. 8-10 workdays**

Welding Set Aluminuim Welder - 315 A - 400 V - Pulse - Water Cooler + Welding helmet – Metalator - EXPERT SERIES

Highlights & Key Facts

  • Adjustable helmet
  • Visor-face distance adjustable
  • Light protection DIN 4 – 8 or DIN 9 - 13
  • 100 x 65 mm field of view
  • Viewing angle adjustable
  • Light protection for all common welding processes
  • Delay time (0.25 - 0.8 s)
  • Switching time 1 / 30,000 s
You will save up to 3% when purchasing this set, compared to a single item order Welder The TIG welding device ENTRIX 315 by Welbach is a robustly built, highly reliable welding machine. It...More information

Description

You will save up to 3% when purchasing this set, compared to a single item order

Welder

The TIG welding device ENTRIX 315 by Welbach is a robustly built, highly reliable welding machine. It has an input voltage of 410 V and measures 102.00 x 51.00 x 110.00 cm while weighing just 101.7 kg due to the use of lightweight, sturdy materials. The ENTRIX 315 offers welding current settings between 20 and 315 A, providing great flexibility for all kinds of conditions. Order today to secure your competitively priced Welbach ENTRIX 315.

The ENTRIX 315 is particularly suitable for welding aluminium.

To use this welding machine above 200 A, a water cooling system has to be connected.

This machine is delivered without a high voltage plug!

+

Welding helmet

The Metalator welding helmet by the Expert Series from Stamos Germany - the best choice for professional and hobby welders

The automatic Metalator welding helmet from the Expert Series from Stamos Germany is characterized by its light weight and good response speed. The welding helmet is extremely versatile and can be used within all common welding processes (MIG welding, MAG / CO2 welding, manual welding, TIG welding, plasma cutting and micro plasma cutting).

In addition, the automatic welding helmet Metalator is known for its long-lasting visibility (cartridges). The cartridges are powered by solar cells and a CR2450 battery. The welding helmet works with a particularly wide range of light protection, which can be flexibly adjusted from DIN 4 - 8 or from DIN 9 - 13. The size of the screen is an extraordinary 100 x 65 mm. In this way, you can always keep an overview of all the essential details.

The welding helmet is made of robust plastic. This ensures that the welding mask weighs only about 500 grams and that you do not have to worry about any restrictions or pain during work. A particularly prominent characteristic of the Metalator is the simple adaptation to every head shape. Also adjustable is the distance between the face and the visor. This guarantees that the helmet sits extremely securely and can be used first-class.

In addition, Expert Series welding helmets have an outstanding response time of 1 / 30,000 seconds from light to dark. This means that you are always protected from dangerous arcs. The outstanding reaction time also allows for a seamless transition without the eyes being too stressed or requiring a prolonged adaptation time. Thanks to the highest possible values of optical class, scattered light, homogeneity and viewing angle dependence, the Metalator is particularly suitable for professional use.

The automatic Metalator welding helmet can be used with all common welding procedures and also has a practical grind mode. Thus, the helmet can be used for sanding, cutting and grinding work without an annoying up-and-down. Metalator stands out as early as 3 amps. Whether you are an artisan, want to use the welding helmet for private use or to be used in the workshop, the Metalator combines all the necessary protection mechanisms and Impresses with its quality and longevity.

 

Technical Details

Article
ENTRIX315
Rated input voltage
400 V, 3 Phases
Power frequency
50/60 Hz
Rated input current
13 A
Rated input power
8.6 kVA
Welding current
20-315 A
No-load voltage
60 V
Pulse frequency
0.2 - 500 Hz (DC) 0.2 - 20 Hz (AC)
Pulse and empty ration
1 - 99%
AC frequency
20 - 100 Hz
AC clean width
-40 - +40%
AC clean scope
-20 - +20%
Current up/down slope time
0 - 15 s
Gas pre-flow time
0 - 3 s
Gas post-flow time
0 - 99.9 s
Rated duty cycle
35%@315A 80%@241A 100%@186A
Efficiency (under rated condition)
≥ 0.85
Power Factors
0.7 - 0.9
Insulation grade
IP21S
Weight (kg, netto)
101.7 kg
Weight (kg, brutto)
138 kg
Dimension (cm, netto) (LxWxH)
102 x 51 x 110 cm
Dimension (cm, brutto) (LxWxH)
114 x 62 x 118 cm
Model
Metalator
Article number
2989
Condition
New
Material
Plastic
Head fitting
Adjustable
Face-sight-clearance
Adjustable
Field of view
100  x 65 mm
Arc sensors
4
Power supply
Solar and 1 x battery CR2450
Light protection
DIN 4 – 8 / DIN 9 - 13
Light level
DIN 3
Switching time
1/30.000 s
Delay (when lightened)
0,25 - 0,8 s
Minimum welding current
3 A
Optical class
1
Scattered light
1
Homogeneity
1
Viewing angle dependency
1
Grind-Mode
Yes
Operating temperature
-10 to +55 °C
Storage temperature
-20 to +70 °C
Dimensions (LxWxH)
102 x 51 x 110 cm
Weight
101.7 kg
Shipping dimensions (LxWxH)
114 x 62 x 118 cm
Shipping weight
138 kg

Functions

 
MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
PROTECTIVE GAS

TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.

 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR
 
MMA WELDING CABLE CONNECTOR
 
TIG TORCH CONNECTOR
 
FOOT PEDAL CONNECTOR

This unit can also be operated using a foot pedal.

 
SUPPLY VOLTAGE

This device works with a 3-phase connection (400 V +/- 10 %).

 
COOLING SYSTEM CONNECTIONS

If welding with more than 200 A it is recommend that a cooler is used. The connections of the welding device and the cooler-lines are marked accordingly with colours.

 
NON-CONTACT HF-IGNITION

A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.

 
GAS PRE-FLOW TIME

This is the time taken from the moment of pressing the torch button to that of the electric arc igniting. During this process the solenoid valve opens and the released gas pushes the oxygen from the gas lines and in doing so, forms a protective atmosphere for the arc.

 
STARTING CURRENT

Value of the arc ignition output current. This current can be adjusted at will. For precision welding, it is recommended to start with reduced power, weld smoothly and eventually adjust the current accordingly.

 
CURRENT RISE TIME

The time taken by the output power to rise to that of the welding current’s value.

 
WELDING CURRENT
 
DOWN SLOPE TIME

The time taken of the output welding current to lower to that of the terminal current.

 
FINAL CURRENT

The output current value before the end of the weld. Welding with the final current helps prevent a crater forming at the end of the weld.

 
GAS POST-FLOW TIME

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

 
PULSE

This function reduces the heat to the material. It is primarily suitable for welding thin plates. If MIG welding is used, it is perfect for aluminium welding.

 
PULSE FREQUENCY

The frequency of impulses during pulse mode.

 
PULSE DUTY FACTOR

Relation of pulse duration to period duration.

 
IMPULSE CURRENT

The maximum value of the electric current while in pulse mode.

 
BASE CURRENT

The current which maintains the arc while in pulse mode.

 
POWER FACTOR CORRECTION

This is the percentage difference of the time between the positive and negative direction of the current during a welding period. This feature allows control of the width of the welding seam and the depth of penetration.

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

 
HOT START

Through automatically boosting the tension at the ignition of the arc, this function facilitates the electrical arc ignition. After ignition, the unit automatically returns to the pre-set voltage.

 
ARC FORCE

The current value increases automatically when the arc is shorter.

 
ANTI-STICK

This function helps to prevent overheating of the electrode by switching off the welding current when the electrode sticks to the material.

 
TIG WELDING

A welding method in which the arc is maintained through an electrical current supplied from a non-consumable electrode. The arc is protected from the access of air by an inert gas.

 
MMA WELDING

Electrode welding with a coated electrode.

 
POWER SWITCH
 
PARAMETERS / FUNCTION SELECTION
 
PARAMETERS / FUNCTION CONTROL
 
"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

 
TIG AC/DC MODE SWITCH

TIG welding is divided into AC (alternating current) and DC (direct current) welding.

 
PULSE FUNCTION SWITCH

Used to switch the pulse function on and off.

 
SWITCH BETWEEN THE WELDING METHODS

By using the SHIFT key the welding mode can be selected.

 
CHOOSE THE WELDING MACHINE MODE

Choose between either “MANUAL" control, to manually input the parameters or "SYNERGIC/EASY", in which the device will set parameters partially by itself.

 
COOLING SWITCH

Water cooling attachments can be switched on via the welding device’s main power switch. Alternatively it can be operated independently from the welding device.

 
DISPLAY

Shows the welding / cutting parameters.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

 
LOSS OF PHASE LED

The LED lights to indicate that the network connection of the phase has failed.

Additional Information

2050-panel

  1. GAS PRE-FLOW = Gaszufuhr
  2. STARTING AMP. = Anfangsstrom
  3. CURRENT UP SLOPE = Stromanstieg
  4. WELDING AMP. = Schweisstrom
  5. 5. PEAK AMP. = Spitzenstrom
  6. BASE AMP = Basisstrom
  7. CURRENT DOWN SLOPE = Stromabstieg
  8. FINAL AMP. = Endstrom
  9. GAS POST-FLOW = Gasnachlauf
  10. CLEAN WIDTH = Reine Breite
  11. AC FREQ = Wechselstromfrequenz
  12. PULSE WIDTH = Pulsbreite
  13. PULSE FREQ = Pulsfrequenz
  14. SELECTION PARAMETER = Parameterwahl
  15. SELECTION PARAMETER = Parameterwahl
  16. ADJUSTMENT PARAMETER = Parameter-Einstellung "-"
  17. ADJUSTMENT PARAMETER = Parameter-Einstellung "+"
  18. EASY / STICK / PULS TIG / TIG = Strömungszustand-Wahltaste
  19. STICK = MMA-Schweißen.
  20. PULSE TIG = TIG Schweißen mit Pulsfunktion.
  21. TIG = TIG Schweißen.
  22. EASY = automatisches Schweißen
  23. 4T/2T = Wahltaste
  24. 2T = Modus (ohne Selbstblockade)
  25. 4T = Modus (mit Selbstblockade)
  26. AC/DC  = Auswahltaste
  27. AC-Funktion = Schweißen von Aluminium und Nichteisenmetallen (Messing, Bronze)
  28. DC-Funktion = Schweißen von Edelstahl, legierten Stahl (VA) und unlegierten Stahl
  29. POWER = in Betrieb
  30. WARNING = Fehler
  31. LED Display = aktuelle Amperestärke

welbach-schweissbrenner-335

Teil
Beschreibung
Menge
1A
Lange Rückseite Kappe
1
2A
Kurze Rückseite Kappe
1
3A1
Klemmbuchse 1/16” (1.6mm)
1
3A2
Klemmbuchse 2/25” (2.0mm)
1
3A3
Klemmbuchse 3/32” (2.4mm)
1
3A4
Klemmbuchse 1/8” (3.2mm)
1
4A
Schweißbrenner Griff
1
5A
Klemmbuchsen Gehäuse
1
6A1
Keramikdüse 4; 10N50
1
6A2
Keramikdüse Größe 5; 10N49
1
6A3
Keramikdüse Größe 6; 10N48
1
6A4
Keramikdüse Größe 7; 10N47
1

Delivery Package

  • TIG welder ENTRIX 315
  • inverter welder with torch
  • power cable: 4 m
  • ground cable with clamp: 4 m
  • welding torch with cable: 4 m
  • safety equipment for welding torch
  • water cooler
  • transport cart
  • instruction manual
  • Welding helmet "Metalator"
  • Instruction manual

Customers also viewed

Viewed