Electrode welder - 120 A - Hot Start - LED Display

Installation and maintenance of rails, stairs, gates and doors, containers or objects made from metal can be finished in a professional way. The E-Hand or MMA device welds materials like steel, iron, cast iron, nickel, copper or aluminium from 1.5 mm thickness.

The electrode welder has been designed for an efficient and practical operation. Clean and durable welding seams can be achieved in minimal time. The welding current can be seamlessly adjusted with a regulator and goes up to 120 A. The LED display informs of the current parameters.

At the full power of 120 A, the device has a duty cycle of 60 percent. The power can be regulated down to 93 A which increases the duty cycle for a longer operation without pausing. You do not need any protective gas. The E-Hand welder can be used and will work at great precision, even in adverse circumstances, for example with strong winds.

The Hot-Start-function of the electrode welder procures an automatic and short-term increase of the welding current. Thanks to this “Hot Start”, the starting point is immediately heated to the optimal temperature and the electrodes do not clog. You get perfect welding results from the first.

The consistent operational reliability of the E-Hand welder is ensured by the ventilator, the overheat protection and the information displayed on the LED display. The device has a carrying strap for easy transportation.