Plasma Cutter - 60 A - 400 V

£485.⁰⁰ Prices incl. VAT
Shipping costs abroad not included*

(0)

Play Video

360° photo

£485.⁰⁰

Prices incl. VAT
Shipping costs abroad not included*

Free shipment to UK
?

Ready to ship today, Delivery time appr. 1-2 weeks**
30 days return service
?
3 years guarantee

Product highlights

High cutting speed
PRO Series - Cable: 8 m
Cutting current: 20 – 60 A
Power ventilator
400 V high voltage current

Cut through steel as if it was butter - with the plasma cutter S-Plasma 60P from Stamos Germany

The plasma cutter is perfectly suited for precisely cutting stainless steel, cast iron, copper, brass and other electroconductive metals of up to 20 mm thickness. It generates a light arc with very high temperatures which allows you to cut through thick steel as if it were butter. The cutting current of the plasma cutter S-Plasma 60P is adjustable between 20 and 60 amps, which means that the device is adaptable to all conditions. First-class cutting quality, separation cuts and precision. Even at the more difficult end parts you get perfect cuts, thanks to the high reserve capacity. This high quality allows for better results with less reworks.

Show moreShow less

Saving time and working efficiently is becoming more and more important. Use your time in an effective manner - with the plasma cutter from Stamos Germany. The cutting speed is high, which ensures precise and high-quality weld seams with minimal material waste. The device has a jump-start-function which allows you to start it even during the gas post-flow.

Show moreShow less

Easy to use, even under difficult circumstances

Adjust the strength of the current to your needs. The seamless adjustment of the current is effected with a simple and practical rotary knob. You can change the parameters quickly and easily, without needing to remove your protective gloves. Even in bad lighting conditions, you can always see the display clearly.

Show moreShow less

As protection against overheating, the plasma cutter has a high-powered ventilation system that cools the device during operation. During a prolonged use, overheating might occur. This will be indicated with a control/warning light. Keep an eye on the lamp to stay safe.

Show moreShow less

Energy efficiency - Expensive plasma gas is a thing of the past

The device is powered by 400 volts. You can also use a generator with a minimum power output of 8 kVA for mobile operation. The plasma cutter is powered with inexpensive pressurized air. You need a compressor with a pressure of ingoing air of 6.2 bar and a passage of air of 170 l/m. This is best achieved with a 10-bar-compressor.

Show moreShow less

The construction stands out for its compact, robust design and its low tare weight of only 24.8 kg. The plasma cutter can be easily transported. The air-cooled cutting unit has a powder-coated sheet steel casing. The plasma cutter has an 8 m ground cable. You can work on a large scale without being hindered by a short cable.

Show moreShow less

Attention! The device will be delivered without a high current connector!

Exact current thanks to the seamless adjustment of the cutting current
High-powered ventilation for efficient cooling
Cost-effective with inexpensive pressurized air
Compact, mobile construction, versatile applications
Jump-start-function, even during the gas post-flow

Plasma Cutter - 60 A - 400 V

The expert for craft supplies, Stamos Germany, offers first-class plasma cutters as well as welders. The Pro-range has been developed with inverter technology and is the best choice for maximum energy savings. In workshops, in agriculture and car repair shops, you need a cutting unit that is robust, flexible and reliable. The mobile plasma cutter S-Plasma 60P combines these features. Coated or rusted materials can be easily handled. All you need is a rotary current and pressurized air.

Model

S-Plasma 60P

Item number

2004

Condition

New

Input voltage

400 V, 3-phase

Input frequency

50 / 60 Hz

Rated input current

8.2 A

Input current, max.

11 A

Rated input power

5.3 kVA

Input power, max.

7.2 kVA

Open-circuit voltage

240 V

Cutting current

20 – 60 A

Duty cycle

60 %

Cutting current at 100% DC

46 A

Cutting current at 60 % DC

60 A

Ignition

Contact

Cutting power

22 mm

Kerf width

1 mm

Air flow

170 l/min

Air pressure

6 bar

Length, cable assembly

8 m

Length, ground cable

8 m

Length, power cord connection

1.2 m

Device cooling

Ventilator

Cooling distiller

Air

Power factor

0.93

Efficiency (below rated power)

≥ 0.85

Insulation class

Protection class

IP20S

Dimensions (LxWxH)

54 x 37 x 20 cm

Weight

24.8 kg

Shipping dimensions (LxWxH)

72 x 30 x 41 cm

Shipping weight

26.4 kg

Technical drawing

Download PDF

Delivery Package

Plasma cutter S-Plasma 60P
Ground cable with clamp (8 m)
Cable assembly (8 m)
2 electrodes
2 ceramic nozzles
2 cutting nozzles
2 ceramic rings
Instruction manual

MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less

VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Show moreShow less

EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

GROUND TERMINAL CONNECTOR

CUTTING TORCH CONNECTION

SUPPLY VOLTAGE

This device works with a 3-phase connection (400 V +/- 10 %).

WELDING CURRENT

2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

POWER SWITCH

DISPLAY

Shows the welding / cutting parameters.

OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

The diverse assortment of products from Stamos enable you to cut or join materials efficiently and precisely. Our portfolio ranges from professional soldering stations to top-class welding machines and precise plasma cutters, to the matching accessories. Let us demonstrate to you the functionality, quality and versatility – not to mention the cost-effectiveness – of our professional line. Our videos show our products in action.