Factory second Car Battery Charger - jump start - 12 / 24 V - 45 A

Whether you are starting a petrol engine or pre-glowing a diesel engine, with the jump starter you can be prepared for any situation. The charger with a maximum starting current of 130 A reliably ensures that the engine restarts quickly even if the car battery is flat. Especially in a car workshop, where an engine is often only started for a short time, the battery hardly has a chance to charge properly. With this device, you can get a quick jump start that consumes a maximum of 2200 W during the process.

Use the charger to reliably charge car batteries with a nominal capacity of 12 V 20 - 250 Ah; 24 V 30 - 300 Ah. With 45 A, it achieves particularly fast charging times. With an output voltage of 12 V or 24 V, you can also use the unit for the necessary voltages for larger vehicles such as trucks. So it doesn't take long for the battery to be ready for use again after it's charged. Always check that your battery meets the recommended battery capacity before charging it.

Control the charging power in a user-friendly way via a switch in just two stages: MIN for normally discharged batteries, MAX for deeply discharged batteries at the lower limit. Depending on whether the battery is only weakened by many short trips or is almost discharged by power-hungry extras such as windscreen or seat heaters, with the MIN or MAX levels you will be prepared for any charging situation. Thanks to the built-in fuse, it's protected against short circuits should you ever connect the cables with the wrong polarity.

The car charger is impressive not only with its compact design, but also with numerous useful details. The connection cables to the battery are built into the unit so that they cannot get lost. In addition, you can store them neatly in a compartment. Thanks to a sturdy handle, you can easily transport the battery charger from one car to the next.