Factory second Combined Welder - 250 A - 230 V - FCAW

Rely on our S-MIGMA 250.IGBT combined welder from Stamos Germany for a professional, innovative and high-quality handling of your repair and maintenance work. Conveniently combining the MIG / MAG, MMA, TIG and FCAW (welding with cored wire) welding procedures, our welder offers you incredible versatility.

No matter what sort of metal work you need to do, our combined welder's wide range of welding methods will help you effortlessly achieve it. Have unlimited possibilities to safely and efficiently connect metals at your fingertips, whether thin aluminum sheets or robust steel girders, with or without gas, for constructions or in the workshop,

With its powerful IGBT-inverter, this welder is able to quickly switch between welding processes, thus delivering high-quality welds with a very low error rate. Additionally, its clearly structured control panel offers complete control over the necessary welding parameters.

When it comes to MIG / MAG welding, the welding seam is protected with gas: inert gas for MIG welding, and active gas for MAG. This welding method is characterized by high welding quality, efficiency and remarkable welding speed. It consequently is universally applicable, regardless of whether for large steel structures or smaller welding tasks.

The TIG welding process is characterised by its high precision and flexibility. Make full use of its flexibility by employing it from whichever position you find most comfortable, be it horizontally or even overhead. Additionally, this welding method can also be used for very thin sheets, from 0.5 mm upwards. The low heated area causes next to no distortions, thus allowing you to obtain clean welds with little weld spatter or need for extra work. As a result, you can use this welding function either with or without filler material, depending on the metal.

The Hot-Start-function of the electrode welder procures an automatic and short-term increase of the welding current. Thanks to this “Hot Start”, the starting point is immediately heated to the optimal temperature and the electrodes do not clog. You get perfect welding results from the first.

Lastly, FCAW welding allows weld seam to be produced by means of a cored wire, without the need for additional gas as a protection. Accordingly, our device is remarkably handy, allowing you not only to weld from whichever position you require, but also outdoors, should you desire to. Its versatility enables it to be suitable for a wide range of small metalwork, repairs or base welding work on cars.