Plasma Cutter - 125 A - 400 V - Pilot Ignition

Item number: EX10020067 / Model: S-PLASMA 125H

Plasma Cutter - 125 A - 400 V - Pilot Ignition

  • Item number: EX10020067
  • Model: S-PLASMA 125H
  • In the product range since: 2008
 
 
 
£879.00  

Prices incl. VAT Shipping costs abroad not included*

Ready for immediate shipping When ordering and making payment within the next 0 hours 10 mins, shipping will happen today.

Ready to ship today, Delivery time appr. 4-6 workdays**

Plasma Cutter - 125 A - 400 V - Pilot Ignition

The plasma cutter S-PLASMA 125H by Stamos Germany is a robust and highly reliable machine. It has an input voltage of 400 V. Measuring 63.5 x 27 x 40 cm, it is manufactured using lightweight, sturdy materials, weighing only 33.9 kg. The Stamos S-PLASMA 125H offers cutting current settings between 30 and 125 A, providing great flexibility for all kinds of conditions. Order today to secure your competitively priced Stamos Selection S-Plasma 125H.

The device is delivered without a high voltage plug.

Model
S-Plasma 125H
Input voltage
400 V 3-Phases
Frequency
50/60 Hz
Input current
20 A
Open circuit voltage
300 V
Degree of housing protection
IP21S
Insulation class
F
Overheating protection
Yes
Cooling
Fan
Magnetic valve
Yes
Turn-on duration ED at max. A
60%
A at 100% duty cycle
96.8 A
Cutting current
30 - 125 A
Ignition
Non-Contact
Cutting depth
≤ 35mm
Cutting width
1.4 mm
Compressor connection
7 bar
Dimension (LxWxH)
63.5 x 27 x 40 cm
Weight
33.9 kg
Shipping dimension (LxWxH)
74 x 38 x 52 cm
Shipping weight
34.8 kg
 
IGBT

IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor. The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology.

 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
CUTTING TORCH CONNECTION

 

 
SUPPLY VOLTAGE

This device works with a 3-phase connection (400 V +/- 10 %).

 
WELDING CURRENT

 

 
GAS POST-FLOW TIME

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH

 

 
"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

 
DISPLAY

Shows the welding / cutting parameters.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

 
VOLTAGE LED

The LED lights to indicate that the supply voltage has dropped by 10% or more than that of the required voltage.

 
OVERVOLTAGE LED

The LED lights to indicate that the actual voltage is 10% or more than the value of the supply voltage.

 
PRESSURE DROP LED

The LED lights to indicate that the gas pressure has fallen below that of the minimum value.

 
LOSS OF PHASE LED

The LED lights to indicate that the network connection of the phase has failed.

 
PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

2067-panel

  1. CURRENT = current adjustable
  2. POST FLOW = post-gas time
  3. 2T/ 4T = switch button
  4. TEST GAS = testing/cooling
  5. U. V LED = Under Voltage drops  below 330V
  6. O. V LED = Over Voltage rises above 420V
  7. LED Display = actual amperage
  8. OVERLOAD/FAILURE
  9. GASSHT = none or insufficient gas flow
  10. PHASES LOSS OF CURRENT

The diverse assortment of products from Stamos enable you to cut or join materials efficiently and precisely. Our portfolio ranges from professional soldering stations to top-class welding machines and precise plasma cutters, to the matching accessories. Let us demonstrate to you the functionality, quality and versatility – not to mention the cost-effectiveness – of our professional line. Our videos show our products in action.

  • S-Plasma 125H
  • plasma hose package: 5 m
  • air hose: 4 m
  • ground cable: 3 m
  • 5 cutting nozzles
  • 5 electrodes for plasma
  • manometer
  • pressure regulator
  • instruction manual

Write the first review for this product







Leave a review
Evaluations will be activated after verification.

The fields marked with * are required.