Styrofoam Cutter Easycutter - 200 W - 1350 mm

Item number: EX10210026 / Model: EASYCUTTER

Styrofoam Cutter Easycutter - 200 W - 1350 mm

  • Item number: EX10210026
  • In the product range since: 2018

Prices incl. VAT Shipping costs abroad not included*

Ready to ship today, Delivery time appr. 4-6 workdays**


  • Millimetre-precise cuts with a lasered scaling
  • Effortless and smooth cutting with a guide carriage
  • Protected against adverse weather conditions, in accordance with protection class IP68
  • Adjustable and repeatable cut depth and angles
  • Suited for scaffolding, tiltable by 90°

Key facts

Styrofoam Cutter Easycutter - 200 W - 1350 mm

The Styrofoam cutter Easycutter from ProBauteam is a professional cutting device for insulating and other materials made of Styrodur, polystyrene foam and Styrofoam. The Styrofoam plates are cut with a tensioned hot cutting wire, which is heated up to and maintained at the optimum working temperature with a 200-watt transformer.


The hot wire cutter Easycutter meets all the demands that insulation work, renovations or building refurbishments require from a cutting device for insulating material. The high precision of the work is ensured by the lasered scaling and the 100 cm long ball-bearing guide carriage. The advantage of lasered scaling compared to printed scaling lies in the absolute accuracy and security against abrasion or blurring of the units of measurement.

Precise and clean cuts for Styrofoam and insulation material with the Easycutter


Working with the hot wire is very easy: The push-button switch on the cutting handle is activated and within 1-2 seconds the Styrofoam cutter is ready for operation - even for continuous use. The hot wire is put between the springs automatically and glides effortlessly through the insulating material thanks to the ball bearing guide. The cuts are straight, smooth and clean.


Even in adverse weather conditions: The waterproof transformer (protection class IP68) and the splash-proof electrical connections between bracket and transformer (industry-standard XLR) ensure reliable protection against rain and moisture.


The millimetre-precise cuts of the Easycutter are made possible thanks to the fine adjustments of cutting length, depth and angle. The long plate of the scale can be tilted so that mitres may be cut horizontally and vertically. The depth limiter ensures that the material remains level and secure even on slopes. The Styrofoam cutter has pre-assembled stop riders, which allow for a precise repetition of the same cuts.


The maximum cut length for this material is 1350 mm, with a cut depth of 320 mm. All the common board sizes can be processed. Thanks to the supplied 90° rack mount, the Styrofoam cutter can be placed in the workshop, on the floor - e.g. leaning against Euro pallets or diagonally against the wall, but also used safely on scaffolding.


The Styrofoam cutter Easycutter has a compact design and is therefore easy to transport and can be used even in confined spaces. It comes with five "Styrogrips”. These little helpers can be used to grasp hard foam parts and for fixing the insulating material parts to the wall until the adhesive has dried, in an edge-precise and jointless way. A practical grinding rasp is included in delivery.

Item number
Voltage / Frequency
230 V / 50 Hz
37 V / 200 W
Protection class:
IP 68 with heat protection
Cut length
1350 mm
Cut depth
320 mm
Dimensions (LxWxH)
86 x 104 x 164 cm
14.1 kg
Shipping dimensions (LxWxH)
169 x 47 x 16 cm
Shipping weight
17.5 kg
  • 1 Styrofoam cutter Easycutter 3012
  • 5 Cutting wire
  • Mounting
  • 5 Styrogrips
  • Grinding rasp
  • Instruction manual
5 Basierend auf 1 Bewertung/en

Sort by...

Leave a review
Evaluations will be activated after verification.

The fields marked with * are required.

Reviews from Antonín (14 Jan 2020)
Reviews from Antonín (14 Jan 2020)

Řezačka polystyrénu Easycutter - 200 W - 1350 mm

po krátkém vyzkoušení zatím spokojenost