Styrofoam Cutter Set - Easycutter - 200 W and Hand Cutter Styrocutter - 250 W
The Styrofoam cutter Easycutter by ProBauteam is a professional cutting device for insulating and other materials made of Styrodur, polystyrene foam and Styrofoam. The Styrofoam plates are cut with a hot cutting wire, which is heated up to and maintained at the optimum working temperature with a 200-watt transformer. The set is complemented with the hand cutter Styrocutter, which is ideally suited for detailed work such as the preparation of cable or pipe recesses, socket openings as well as window reveals. It optimally expands the possibilities of cutting building insulation, thermal insulation composite systems (ETICS) and others.
The hot wire cutter Easycutter meets all the demands that insulation work, renovations or building refurbishments require from a cutting device for insulating material. The high precision is ensured by the lasered scaling and the 100 cm long ball-bearing guide carriage. The advantage of lasered scaling compared to printed scaling lies in the absolute accuracy and security against abrasion or blurring of the units of measurement.
Working with the hot wire is very easy: The push-button switch on the cutting handle is activated and, within 1-2 seconds, the Styrofoam cutter is ready for operation - even for continuous use. The hot wire is put between the springs automatically and glides effortlessly through the insulating material thanks to the ball bearing guide. The cuts are straight, smooth and clean.
Even in adverse weather conditions: The waterproof transformer (protection class IP68) and the splash-proof electrical connections between bracket and transformer (industry-standard XLR) ensure a reliable protection against rain and moisture.
The millimetre-precise cuts of the Easycutter are made possible thanks to the fine adjustments of the cutting length, depth and angle. The long plate of the scale can be tilted so that mitres may be cut horizontally and vertically. The depth limiter ensures that the material remains level and secure even on slopes. The Styrofoam cutter has pre-assembled stop riders, which allow for a precise repetition of the same cuts.
The maximum cut length for this material is 1350 mm, with a cut depth of 320 mm. All the common board sizes can be processed. Thanks to the supplied 90° rack mount, the Styrofoam cutter can be placed in the workshop, on the floor - e.g. leaning against Euro pallets or diagonally against the wall, but also used safely on scaffolding.
The Styrofoam cutter Easycutter has a compact design and is therefore easy to transport and can be used even in confined spaces. It comes with five "Styrogrips” These little helpers can be used to grasp hard foam parts and for fixing the insulating material parts to the wall until the adhesive has dried, in an edge-precise and jointless way. A practical grinding rasp is included in delivery.
The Styrocutter melts the material at the cut surface and thereby ensures a perfectly clean cut. Before cutting, the blade is heated to the needed temperature and effortlessly glides through the Styrofoam, leaving clean edges. The cutting temperature of the hand cutter can be adjusted in 16 steps to up to 500 °C. The powerful transformer ensures a quick heating within 5 to 10 seconds.
The ergonomic one-hand handle and the cable length of 3m allow you to work comfortably. The supplied blades are extra hardened and can easily be exchanged with an Allen key. Depending on the task, you can use different blades, be this for straight cuts, grooves or holes for sockets. Other accessories and blades, with which you can perform a wide variety of tasks, can be found on the expondo online shop.
The professional device is very compact, lightweight and has practical hanging brackets, in case you need both hands to handle larger Styrofoam boards. In addition, the tried and tested technology has a very low maintenance. For ease of transportation, the device and its accessories are delivered in a handy case with an ergonomic handle.