Gasless MIG/MAG Welder - 90 A

The S-MIG 100 filler wire welding machine from Stamos Power is versatile device which specialises in smaller welding tasks such as those within the home, in the garden or the workshop. It is easy to handle, compact in design and low in weight, so it very mobile, which is helped even further with the carry handle. A roll of filler wire (0.8mm, 23kg) is included, allowing you start welding immediately.

With FCAW welding, the weld seam is produced using a filler wire, without the need for additional protection gas. This makes the device very practical, allows welding from different positions and can also be used outdoors. It is suitable for a wide range of small metal work, for example basic welding repairs for your car.

The filler wire is fed to the burner via the built-in wire feed. The feed speed can be adjusted via a controller so that precise welding results can be achieved. During welding, the welding machine is automatically air-cooled with a fan.

The welding machine is ideally suited for materials such as medium to light alloy steel, cast iron or nickel alloy. The weld seam shows fewer defects than other SMAW or GMAW processes. After welding, the resulting slag is easily dissolved.

The operation is very simple with few controllers and requires only a little knowledge and experience to use. In addition to an on / off switch, the current level and the wire feed can be adjusted. The filler wire electrode is the only consumable material of the device, which must be replaced if necessary. Excessive heat generation during the welding process is prevented due to an overheating protection system.