Plasma Cutter - 50 A - 230 V
£229.00 Prices incl. VAT

Plasma Cutter - 50 A - 230 V

Manufacturer: Stamos Power ² | Item number: EX10020126 | Model: S-CUTTER 50

Plasma Cutter - 50 A - 230 V
Plasma Cutter - 50 A - 230 V
Plasma Cutter - 50 A - 230 V
Plasma Cutter - 50 A - 230 V
Plasma Cutter - 50 A - 230 V
Plasma Cutter - 50 A - 230 V
Plasma Cutter - 50 A - 230 V
Play Video
360° photo
Tap to open gallery
£229.00

Prices incl. VAT

  • Free shipment to UK

    ?

    Ready to ship today, Delivery time appr. 6-10 working days

  • 30 days return service

    ?
  • 3 years guarantee

Product highlights

  • Cutting current: 50 A
  • Cutting depth: 12 mm
  • Cutting width: 1 mm
  • LCD display
  • Duty cycle: 60 %

The plasma cutter from Stamos Power impresses with a long duty cycle of 60 percent at 50 amps welding current. To reach a duty cycle of 100 percent, the cutting current must be throttled to 38.7 A. Depending on the application, the current intensity can be infinitely adjusted between 10 and 50 amps at the power unit. With these performance values, the plasma cutter can effortlessly handle tasks in the automotive sector, in metalworking and other workshops as well as in industrial metal processing.

Show more Show less

The settings for plasma cutting are easy to control via the clearly-laid-out control panel. The cutting current of 10 to 50 A can be set using a continuous dial, the current value of which is clearly shown on the large LED display. The air pressure is also defined using a control knob and can be read via a pressure gauge. This allows you to effortlessly adjust both values even when wearing welding gloves.

Show more Show less

Depending on requirements, the air pressure is regulated down via the integrated pressure reducer. With a delivery rate of up to 175 liters of air per minute, the air pressure can be up to 6 bar, but should reach at least 4 bar. You can choose the external compressor depending on the requirements and circumstances. Thus, the device proves to be very flexible and easy to transport. With the help of compressed air, an arc is generated that cuts through a wide variety of metals and their alloys, such as stainless steel, copper, aluminum or titanium. Depending on the material, workpieces up to 15 millimeters thick can be cut. The plasma arc is ignited with the proven technology of contact ignition.

Show more Show less

The plasma cutter S-Cutter 50 also scores points with its handling characteristics. The ergonomic torch sits well in the hand, and the PT 31 softgrip coating ensures a firm grip during operation. The 5 metre-long cable between the power unit and the torch grants plenty of freedom of movement when working on larger workpieces such as vehicles or heating systems.

Show more Show less

Efficient air cooling is one of the basic requirements for the high performance of the unit. A fan ensures the necessary air circulation in the housing. A powerful cooling system can also contribute decisively to a long service life for the plasma cutter. The same applies to the switch-off device in the event of overheating.

Show more Show less

The coated sheet steel housing is also designed for a long service life. It permanently prevents mechanical damage to the device components. The plasma cutter can be carried using a stable, handy handle. Four feet ensure stability at the job site.

Show more Show less

  • Duty cycle of 60% at 50 A
  • Modern, easy-to-read control panel
  • Handy torch with softgrip coating
  • Efficient air cooling system
  • Durable design due to coated sheet steel housing

Plasma Cutter - 50 A - 230 V

The plasma cutter S-Cutter 50 from Stamos Power efficiently cuts through metal with up to 50 A cutting current. It is just as useful in garages and workshops as in industry. The device proves itself in the hard everyday work of professionals, but also supports ambitious DIY enthusiasts in renovating and repairing.

Model
S-CUTTER 50
Item number
10020126
Condition
New
Functions
Plasma Cutting
Rated input voltage
230 V, 1 phase
Frequency
50/60 Hz
Rated input current
28.7 A
Max. input current
37.2 A
Rated input power
6.2 kVA
Max. input power
8 kVA
Open circuit voltage
244 V
Ignition
Contact
Cutting current
10 - 50 A
Operating time / duty cycle
60 %
Cutting current at 100% DC
38.7 A
Cutting current at 60% DC
50 A
Cutting torch (Ø connection)
PT-31 (16 mm)
Cutting power
12 mm
Cutting width
1 mm
Air flow
175 L/min
Air pressure
5 - 6 bar
Power factor
≥ 0.85
Length, ground cable
3 m
Length, cable assembly
5 m
Length, power cable
2 m
Insulation class
F
Protection class
IP21
Device cooling
Fan
Dimensions (LxWxH)
41.00 x 19.00 x 31.00 cm
Weight
9.00 kg
Shipping dimensions (LxWxH)
53.00 x 27.00 x 44.00 cm
Shipping weight
15.00 kg
Technical drawing
Delivery Package
  • Plasma cutter S-CUTTER 50
  • Plasma torch with cable assembly, 5 m
  • Gas hose, 3 m
  • Earth cable with clamp, 3 m
  • Plasma electrode
  • Cutting nozzle
  • 2 clamp rings
  • Instruction manual
 
MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Show moreShow less
 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
CUTTING TORCH CONNECTION

 

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
WELDING CURRENT

 

 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH

 

 
DISPLAY

Shows the welding / cutting parameters.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

 
PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

The following accessories can be used with the Plasma Cutter S-CUTTER 50:

Art. No.
Article
2032
Plasma Spare Parts Set - CUT 40 50 - medium
2033
Plasma Spare Parts Set - CUT 40 50 - large

The diverse assortment of products from Stamos enable you to cut or join materials efficiently and precisely. Our portfolio ranges from professional soldering stations to top-class welding machines and precise plasma cutters, to the matching accessories. Let us demonstrate to you the functionality, quality and versatility – not to mention the cost-effectiveness – of our professional line. Our videos show our products in action.

Is the plasma cutter easy to transport?

Yes, the device is relatively light and has a convenient handle.

How can I stay up-to-date on new products and offers?

Sign up for our newsletter and keep yourself up-to-date!

4.5 Based on 7 reviews

Sort by...

Leave a review (5 stars is highest, 1 is lowest)
Click on the link sent to your e-mail address and confirm your opinion! It will be published after verification.

The fields marked with * are required.

Reviews from User (21 Apr 2022)
Reviews from User (21 Apr 2022) Plasmaschneider

Tolles Gerät, top Preis/Leistung, gerne wieder

Reviews from Skipper Jan van Engelburg (12 Feb 2022)
Reviews from Skipper Jan van Engelburg (12 Feb 2022) Top Preis Leistung

Die Maschine leistet sehr gute Ergebnisse und präzise feine Schnitte sind damit ein Kinderspiel.

Reviews from Danny (19 Sep 2021)
Reviews from Danny (19 Sep 2021) sehr zu empfehlen ;)

Top Preis/Leistung. ..guter Service. Danke

Reviews from Anonym (26 Jun 2020)
Reviews from Anonym (26 Jun 2020) parfait

essayé et pour le moment, très satisfait description conforme, produit qui répond a mes attentes, a voir dans le temps

Reviews from Dubois (4 Jun 2020)
Reviews from Dubois (4 Jun 2020) Découpeur plasma 50A

Produit conforme, livraison parfaite dans un emballage très sérieux. On peut juste dire qu’au delà d’un centimètre d’épaisseur d’acier la coupe part en biais. Je recommande le produit et expondo

Reviews from kale (26 Apr 2020)
Reviews from kale (26 Apr 2020) plasmal.

toimiva, HYVÄ laite.Suuttimien puute silloin kun olistarve.TILASIN vain yhden,en kahta.

Reviews from Amazon Customer (28 Aug 2016)
Reviews from Amazon Customer (28 Aug 2016) Super Gerät

Sehr schnelle Lieferung. Nachdem dies bereits der dritte Plasmaschneider ist, nachdem 2 Vörgänger einer anderen Marke bereits nach wenigen cm Schneiden den Geist aufgegeben haben hoffte ich endlich mal auf ein gutes Gerät. Dieser Plasmaschneider wurde endlich meinen Ansprüchen gerecht. Ich kann daher eine bedenkenlose Kaufempfehlung erteilen. Gerät entspricht genau der Beschreibung und tut was es soll. Zündet sehr genau und schneidet ohne Unterbrechung. Habe damit einen T-Träger mehrmals getrennt was ohne Probleme möglich war. Ein Druckminderer ist diesem Gerät wie bei Anderen in dieser Preisklasse. Da aber bereits ein Druckmindereer eingebaut ist, is ein weiterer nicht notwendig. Gerät ist sehr robust und sorgfältig gefertig.

expondo expert

Still not sure?

Our experts are ready to help!
01633 603530
Mon - Fri 09:30am - 04:30pm
Plasma Spare Parts Set - CUT 40 50 - small
£42.99
Prices incl. VAT Shipping costs abroad not included
Plasma Spare Parts Set - CUT 40 50 - medium
£79.00
Prices incl. VAT Shipping costs abroad not included
Schweißhelm – Blaster – ADVANCED SERIES - 2982 - 1
£69.00
Prices incl. VAT Shipping costs abroad not included
This product
  • Cutting current: 50 A
  • Cutting depth: 12 mm
  • Cutting width: 1 mm
  • LCD display
  • Duty cycle: 60 %

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter - 50 A - 230 V

Plasma Cutter - 50 A - 230 V

(7)
£229.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Cutting current: 50 A
  • Cutting depth: 12 mm
  • Cutting width: 1 mm
  • LCD display
  • Duty cycle: 60 %
  • Cutting current: 10 - 50 A
  • Duty cycle: 60 %
  • Cutting depth: 15 mm
  • LED display
  • 230 V

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter - 50 A - 230 V - Basic

Plasma Cutter - 50 A - 230 V - Basic

(4)
£339.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Cutting current: 10 - 50 A
  • Duty cycle: 60 %
  • Cutting depth: 15 mm
  • LED display
  • 230 V