Plasma Cutter - 50 A - 230 V
£319.00 Prices incl. VAT

Plasma Cutter - 50 A - 230 V

Manufacturer: Stamos Power ² | Item number: EX10020153 | Model: S-CUTTER 50.1

Plasma Cutter - 50 A - 230 V
Plasma Cutter - 50 A - 230 V
Plasma Cutter - 50 A - 230 V
Plasma Cutter - 50 A - 230 V
360° photo
Tap to open gallery
£319.00

Prices incl. VAT

  • Free shipment to UK

    ?

    Ready to ship today, Delivery time appr. 6-10 working days

  • 30 days return service

    ?
  • 3 years guarantee

Product highlights

  • Plasma
  • Power
  • 230 V
  • Cutting current: 10 - 50 A
  • Cutting thickness: 12 mm

  • Precise - digital menu navigation with LED display

Plasma cutter with digital menu navigation

The S-CUTTER 50.1 plasma cutter from Stamos Germany, allows for cutting work and grooving planes to be easier due to an easy handling. The plasma cutter is suitable for steel and other such steel alloys, stainless steel, cast iron, copper, nickel and aluminium. Thanks to its versatility, it enriches each and every workshop, as well as the garage of every hobby craftsman.

The S-CUTTER 50.1 is suitable for the precision cutting of a variety of metals and has a high cutting speed whereas the material waste remains low. Thanks to the smooth, adjustable cut (max. 12 mm), no burn traces will be created even with thin metals. In addition, the plasma cutter is lightweight, making it easy to hold, therefore very mobile.

The S-CUTTER 50.1 plasma cutter can always be adapted specifically to the requirements of the user thanks to knobs for the variable setting of the current i and the air pressure. The button for pressure regulation can be determined so that the pressure cannot be inadvertently altered during work. In addition, the device has the button "Gas / Work", which can be actuated to test the gas flow.

For a delivery rate of up to 160 l/min, the air pressure should be at least 4 bar. You can choose the external compressor depending on the requirement and circumstances. Thus, the device proves to be very flexible and easy to transport. With the help of compressed air, an arc is generated that can cut a wide variety of metals and their alloys, such as stainless steel, copper, aluminum or titanium with a thickness of up to 12 mm. The plasma arc is ignited using the proven technology of contact ignition. The 5 m long supply line between the power unit and the torch allows plenty of freedom of movement. Efficient air cooling is one of the basic requirements for the high unit output. The same applies to the shutdown device in case of overheating. The plasma cutter is carried by a sturdy, handy carrying handle.

Users of the S-CUTTER 50.1 can always keep an eye on the functions of the machine thanks to the LED display and the manometer. In addition, the unit has powerful ventilation and overload protection. This means that the plasma cutter can always be optimally controlled by the user and longevity is guaranteed.

In addition to the plasma cutter, you will receive the power cable, the PT-31 plasma torch, a gas hose, a ground cable with clamp and various consumables are also supplied. Thus, the cutting can be started immediately upon receiving delivery.

Model
S-CUTTER 50.1
Condition
New
Rated input voltage
230 V, 1-Phase
Input frequency
50 Hz
Input current
22,2 A
Input current max.
28,6 A
Power input
4,8 kVA
Input power max.
6,6 kVA
Open circuit voltage
244 V
Cutting current
10 - 50 A
Duty Cycle
60 %
Cutting current at 100% DC
38,7 A
Cutting current at 60% DC
50 A
Post-gas
~20 s
Ignition
Contact ignition
Cutting capacity
12 mm
Cutting width
2.0-3.0 mm
Air flow
160 l/min
Air pressure
3,5 bar
Length of hose pack
4,85 m
Length of ground cable
3 m
Length power cable connection
2,1 m
Cooling device
Fan
Torch cooler
Air
Power factor
0.73
Efficiency (under rated power)
≥80
Insulation class
F
Protection class
IP21
Dimensions (LxWxH)
43.00 x 16.50 x 31.50 cm
Weight
11.90 kg
Shipping dimensions (LxWxH)
55.30 x 26.80 x 42.10 cm
Shipping weight
15.05 kg
Technical drawing
Delivery Package
  • Plasma cutter S-CUTTER 50.1
  • Plasma torch 4,85 m
  • Gas hose 3 m
  • Ground cable with terminal 3 m
  • Plasma electrode - 1 pc
  • Clamping ring - 2 pcs
  • Instruction manual
 
MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Show moreShow less
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Show moreShow less
 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
CUTTING TORCH CONNECTION

 

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
GAS POST-FLOW TIME

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

Show moreShow less
 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH

 

 
"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

 
DISPLAY

Shows the welding / cutting parameters.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

 
PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

5 Based on 3 reviews

Sort by...

Leave a review (5 stars is highest, 1 is lowest)
Click on the link sent to your e-mail address and confirm your opinion! It will be published after verification.

The fields marked with * are required.

Reviews from gomez (18 Apr 2020)
Reviews from gomez (18 Apr 2020) plasma stamos cut 50A

reçus avec un peu de retard (confinement oblige) emballage tres robuste et plasma en etat nickel ! air branché et reglé sur 80 PSI (6 bars) et j'attaque du gros direct a savoir un plat de 60x10 que je coupe tres bien sans problemes, test dans du tube de 40x40 ep 2mm et la que du bonheur une coupe avec un trait aussi fin qu'un stylo bille !! de plus il est equipé d'origine d'un épurateur d'air incorporé dans le poste donc ont le branche direct sur le compresseur ! le mien est equipe 2T/4T donc quand c'est un peu long inutile de rester le doigt sur la gachette !
De plus la garantie de 3 ans ne gache rien et les consomables ce trouve sur le net sans problemes (torche PT 31) bref que du bonheur et je recommande

Reviews from Amazon Customer (13 Sep 2019)
Reviews from Amazon Customer (13 Sep 2019) Va molto bene

È molto comodo per i piccoli lavoretti

Reviews from Amazon Customer (26 Dec 2018)
Reviews from Amazon Customer (26 Dec 2018) Consegnato nei tempi stabiliti

Ottimo prodotto

expondo expert

Still not sure?

Our experts are ready to help!
01633 603530
Mon - Fri 09:30am - 04:30pm
Plasma Spare Parts Set - CUT 40 50 - small
£42.99
Prices incl. VAT Shipping costs abroad not included
Schweißhelm – Blaster – ADVANCED SERIES - 2982 - 1
£69.00
Prices incl. VAT Shipping costs abroad not included
This product
  • Plasma
  • Power
  • 230 V
  • Cutting current: 10 - 50 A
  • Cutting thickness: 12 mm

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter - 50 A - 230 V

Plasma Cutter - 50 A - 230 V

(3)
£319.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Plasma
  • Power
  • 230 V
  • Cutting current: 10 - 50 A
  • Cutting thickness: 12 mm
  • Cutting current: 10 - 50 A
  • Duty cycle: 60 %
  • Cutting depth: 15 mm
  • LED display
  • 230 V

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter - 50 A - 230 V - Basic

Plasma Cutter - 50 A - 230 V - Basic

(4)
£339.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Cutting current: 10 - 50 A
  • Duty cycle: 60 %
  • Cutting depth: 15 mm
  • LED display
  • 230 V
  • Plasma
  • Power
  • 400 V
  • Cutting current: 10 - 70 A
  • Cutting thickness: 20 mm

Ready to ship today, Delivery time appr. 6-10 working days

Plasma Cutter - 70 A - 400 V

Plasma Cutter - 70 A - 400 V

(1)
£439.00  

Ready to ship today, Delivery time appr. 6-10 working days

  • Plasma
  • Power
  • 400 V
  • Cutting current: 10 - 70 A
  • Cutting thickness: 20 mm