MIG/MAG Welder - 200 A - Synergic Pulse - MMA

MIG/MAG welder with electrode welding

The MIG/MAG PROXUS 200DS welding machine works with a powerful IGBT inverter technology for maximum flexibility and quality. The infinitely variable regulation of the welding current up to 200 A ensures optimum weld seams for a wide variety of welding work, precisely matched welding values are obtained with the Synergic function. The MIG welding device can be used for electrode welding, which makes it easy to use even outdoors in winds. You can also use the TIG lift-arc function.

With Synergic Pulse, you automatically get optimum welding results

You always have complete control on the clear control panel with LCD display. There is a wide selection of pre-configured settings that you can use for optimal welding results. With Synergic Pulse, you only need to change one value with the push of a button and turn of a dial, the other values such as the wire speed, are automatically adjusted. You can determine and precisely set a 2-stroke or 4-stroke handling. It is equally easy to select the welding method between MIG/MAG, TIG lift-arc and MMA.

At full power, the MIG welding machine reaches 200 A, which can reliably handle even difficult repair and renovation work. If you reduce the welding current to 89 A, you can weld without interruption. A large coil with a diameter of 200 mm is available for the welding wire, so that you can also carry out longer work without renewing the wire. You can use thin or thick welding wires of 0.8 to 1.2 mm. If you want to weld without inert gas, you can also use a flux wire, since the inert gas is already integrated.

The shielding gas welding device has been designed for all metal work in production, workshops, locksmiths or crafts. MIG welding uses inert gases for copper, magnesium and other iron-free metals as well as their alloys; MAG welding with active gases is optimal for structural steel, steel and most of their alloys.

TIG welding with the PROXUS 200DS uses the high-frequency ignition to activate the arc. Compared to high-frequency ignition, the sensitive electronic devices which are located in the vicinity, for example mobile phones, computers or control systems, are not influenced or disturbed. The welding power of up to 200 A is easily controlled via the control panel.

Weld with one electrode without additional shielding gas and remain flexible

MMA welding is mainly used for iron or copper as well as alloys such as cast iron or steel. No gas is required for welding, so the device can also be used in adverse circumstances such as wind. The hot-start and anti-stick functions enable optimum welding results. The Hot-Start-function of the electrode welder procures an automatic and short-term increase of the welding current. The welding seam will be optimally heated. The ANTI-STICK function prevents overheating and the electrode sticking to the welding material by switching off the welding current.

The compact installation of the technical interior in a stable metal casing protects the device from mechanical damage. The device is cooled with a powerful fan. The efficient air circulation protects against overheating and contributes to the longevity of the device.